Software: Apache. PHP/5.5.15 uname -a: Windows NT SVR-DMZ 6.1 build 7600 (Windows Server 2008 R2 Enterprise Edition) i586 SYSTEM Safe-mode: OFF (not secure) C:\Windows\System32\DriverStore\FileRepository\prnhp002.inf_amd64_neutral_04d05d1f6a90ea24\Amd64\ drwxrwxrwx | |
| Viewing file: Select action/file-type: <?xml version="1.0"?>
<!--
This file contains information related to printer capabilities and features. It is recommended
that this file NOT be edited directly, but used in conjunction with HP's Web JetAdmin printer
installation utility or with the HP Printing System Customization Utility contained on the
CDROM that shipped with this product.
Editing this file by hand may result in unexpected feature settings in the printer driver UI.
-->
<device>
<software>
<component>
dmc_driver
<component_header>
<config_file>hplj2300.cfg</config_file>
<config_file_version>1.0.0.9</config_file_version>
<!-- Sept 24, 2002 -->
<config_timestamp/>
<config_version>1.0</config_version>
<!-- Resource DLL Identifier-->
<component_resource>hpbcfgre.dll</component_resource>
</component_header>
<!-- Pre-Configuration Settings Stored in <Current> Element -->
<current>
<physical/>
<printing/>
</current>
<factory>
<!-- !!!!!!!!!!!!!!!!!!!!!!!! PHYSICAL FEATURES !!!!!!!!!!!!!!!!!!!!!!! -->
<physical resource_id="18">
<!-- Bundles -->
<!-- The Bundles feature needs to be first in the physical features list
because of a defect found when exporting from the driver. If features
with forced constraints are not in the right order, there is a good
chance that the forced item macro will cause an unwanted change to
the feature that is being forced to change. -->
<feature typical="TRUE">
Bundles
<current_option>HP LaserJet 2300</current_option>
<option>
HP LaserJet 2300
<!-- Memory to 32 MB -->
<!-- ManualDuplex ON -->
<!-- Duplex Unit OFF -->
<!-- No Tray3 -->
<constraint>ForcePrintOnBothSidesOff</constraint>
<constraint>Bundle_Mopier_NotInstalled</constraint>
<constraint>Force_Duplex_Bundle_Var_BASE</constraint>
<constraint>Force_M32_Bundle_Var_BASE</constraint>
<constraint>Bundle_Memory_Default_Low</constraint>
<constraint>Bundle_Duplex_Unit_NotInstalled</constraint>
<constraint>Bundle_AllowManualDuplexing_Enabled</constraint>
<constraint>Bundle_Tray3_Default_None</constraint>
<constraint>Force_Job_Storage_Off</constraint>
</option>
<option>
HP LaserJet 2300L
<!-- Memory to 32 MB -->
<!-- ManualDuplex ON -->
<!-- Duplex Unit OFF -->
<!-- No Tray3 -->
<constraint>ForcePrintOnBothSidesOff</constraint>
<constraint>Bundle_Mopier_NotInstalled</constraint>
<constraint>Force_Duplex_Bundle_Var_L</constraint>
<constraint>Force_M32_Bundle_Var_L</constraint>
<constraint>Bundle_Memory_Default_Low</constraint>
<constraint>Bundle_Duplex_Unit_NotInstalled</constraint>
<constraint>Bundle_AllowManualDuplexing_Enabled</constraint>
<constraint>Bundle_Tray3_Default_None</constraint>
<constraint>Force_Job_Storage_Off</constraint>
</option>
<option>
HP LaserJet 2300N
<!-- Memory to 48 MB -->
<!-- ManualDuplex ON -->
<!-- Duplex Unit OFF -->
<!-- No Tray3 -->
<constraint>ForcePrintOnBothSidesOff</constraint>
<constraint>Force_Duplex_Bundle_Var_N</constraint>
<constraint>Force_M32_Bundle_Var_N</constraint>
<constraint>Bundle_Memory_Default_High</constraint>
<constraint>Bundle_Duplex_Unit_NotInstalled</constraint>
<constraint>Bundle_AllowManualDuplexing_Enabled</constraint>
<constraint>Bundle_Tray3_Default_None</constraint>
<constraint>Bundle_Mopier_Installed</constraint>
<constraint>Force_Job_Storage_On</constraint>
</option>
<option>
HP LaserJet 2300D
<!-- Memory to 48 MB -->
<!-- ManualDuplex OFF -->
<!-- Duplex Unit ON -->
<!-- No Tray3 -->
<constraint>Force_Duplex_Bundle_Var_D</constraint>
<constraint>Force_M32_Bundle_Var_D</constraint>
<constraint>Bundle_Memory_Default_High</constraint>
<constraint>Bundle_AllowManualDuplexing_Enabled</constraint>
<constraint>Bundle_Duplex_Unit_Installed</constraint>
<constraint>Bundle_Tray3_Default_None</constraint>
<constraint>Bundle_Mopier_Installed</constraint>
<constraint>ForcePrintOnBothSidesOff</constraint>
<constraint>Force_Job_Storage_On</constraint>
</option>
<option>
HP LaserJet 2300DN
<!-- Memory to 48 MB -->
<!-- ManualDuplex OFF -->
<!-- Duplex Unit ON -->
<!-- No Tray3 -->
<constraint>Force_Duplex_Bundle_Var_DN</constraint>
<constraint>Force_M32_Bundle_Var_DN</constraint>
<constraint>Bundle_Memory_Default_High</constraint>
<constraint>Bundle_AllowManualDuplexing_Enabled</constraint>
<constraint>Bundle_Duplex_Unit_Installed</constraint>
<constraint>Bundle_Tray3_Default_None</constraint>
<constraint>Bundle_Mopier_Installed</constraint>
<constraint>ForcePrintOnBothSidesOff</constraint>
<constraint>Force_Job_Storage_On</constraint>
</option>
<option>
HP LaserJet 2300DTN
<!-- Memory to 48 MB -->
<!-- ManualDuplex OFF -->
<!-- Duplex Unit ON -->
<!-- Tray3 -->
<constraint>Force_Duplex_Bundle_Var_DTN</constraint>
<constraint>Force_M32_Bundle_Var_DTN</constraint>
<constraint>Bundle_Memory_Default_High</constraint>
<constraint>Bundle_AllowManualDuplexing_Enabled</constraint>
<constraint>Bundle_Duplex_Unit_Installed</constraint>
<constraint>Bundle_Tray3_Default_500</constraint>
<constraint>Bundle_Mopier_Installed</constraint>
<constraint>ForcePrintOnBothSidesOff</constraint>
</option>
</feature>
<!-- Typical Physical Features -->
<!-- Default Printer Memory Installation -->
<feature resource_id="787" caption_id="10052" typical="TRUE">
<!--range_low="32" range_hi="196"> -->
Memory
<current_option>32</current_option>
<option>
<constraint>MakeSureMopyingIsNotEnabled</constraint>
<constraint>BundleDoesNotSupportM32Capability</constraint>
32
</option>
<option>
48
</option>
<option>
64
</option>
<option>
80
</option>
<option>
96
</option>
<option>
112
</option>
<option>
128
</option>
<option>
144
</option>
<option>
160
</option>
<option>
176
</option>
<option>
192
</option>
<option>
208
</option>
<option>
224
</option>
<option>
240
</option>
<option>
256
</option>
<option>
272
</option>
<option>
288
</option>
<option>
<constraint>BundleDoesNotSupportM304Capability</constraint>
304
</option>
</feature>
<!-- Default OptionalPaperSource Installed -->
<feature resource_id="710" caption_id="10086" typical="TRUE">
OptionalPaperSources
<current_option>None</current_option>
<option resource_id="8">
None
<constraint>Check_InputBin_For_Selected_Trays</constraint>
<constraint>Set_Tray3_To_NotInstalled</constraint>
</option>
<!-- 250 sheet choice -->
<option resource_id="730">
C4793
<constraint>Check_InputBin_For_500_Sheet</constraint>
<constraint>Set_Tray3_To_250_Sheet</constraint>
</option>
<!-- 500 sheet -->
<option resource_id="725">
C7065
<constraint>Check_InputBin_For_250_Sheet</constraint>
<constraint>Set_Tray3_To_500_Sheet</constraint>
</option>
</feature>
<!-- Job Storage -->
<feature resource_id="997" caption_id="10051" typical="TRUE">
JobRetention
<current_option>Disabled</current_option>
<option resource_id="6">
Enabled
<constraint>Make_Sure_Mopier_Is_Installed</constraint>
</option>
<option resource_id="7">
Disabled
</option>
</feature>
<!-- Mopier Enabled -->
<feature resource_id="668" caption_id="10100" typical="TRUE">
DeviceIsMopier
<current_option>NotInstalled</current_option>
<option resource_id="1">
Installed
<constraint>Make_Sure_48MB_Is_Installed</constraint>
</option>
<option resource_id="2">
NotInstalled
</option>
</feature>
<!-- Default DuplexUnit Installed -->
<feature resource_id="662" caption_id="10048" typical="TRUE">
DuplexUnit
<current_option>NotInstalled</current_option>
<option resource_id="1">
Installed
<!-- <constraint>AllowManualDuplexing_Cannot_Be_On</constraint> -->
<constraint>BundleDoesNotSupportAutoDuplexCapability</constraint>
<constraint>ForceBothDuplexersVarTRUE1</constraint>
<constraint>ForcePrintOnBothSidesOff</constraint>
</option>
<option resource_id="2">
NotInstalled
<constraint>PrintOnBothSides_Cannot_Be_On_Auto</constraint>
<constraint>ForceBothDuplexersVarFALSE</constraint>
</option>
</feature>
<!-- Default AllowManualDuplexing Enable -->
<feature resource_id="666" caption_id="10070" typical="TRUE">
ManualDuplex
<current_option>Enabled</current_option>
<option resource_id="6">
Enabled
<constraint>ForceBothDuplexersVarTRUE2</constraint>
<!-- <constraint>DuplexUnit_Cannot_Be_On</constraint> -->
<constraint>ForcePrintOnBothSidesOff</constraint>
</option>
<option resource_id="7">
Disabled
<constraint>PrintOnBothSides_Cannot_Be_On_Man</constraint>
<constraint>ForceBothDuplexersVarFALSE</constraint>
</option>
</feature>
<!-- Advanced Features -->
<!-- Mombi -->
<feature editable="FALSE">
Tray3
<current_option>NotInstalled</current_option>
<option>
NotInstalled
</option>
<option>
Tray3_250
</option>
<option>
Tray3_500
</option>
</feature>
<feature resource_id="19" editable="FALSE">
ModelSupportingDuplexer
<current_option>HP LaserJet 2300</current_option>
<option>
HP LaserJet 2300
</option>
<option>
HP LaserJet 2300N
</option>
<option>
HP LaserJet 2300L
</option>
<option>
HP LaserJet 2300D
</option>
<option>
HP LaserJet 2300DN
</option>
<option>
HP LaserJet 2300DTN
</option>
</feature>
<feature resource_id="19" editable="FALSE">
ModelSupportingMem
<current_option>HP LaserJet 2300</current_option>
<option>
HP LaserJet 2300
</option>
<option>
HP LaserJet 2300N
</option>
<option>
HP LaserJet 2300L
</option>
<option>
HP LaserJet 2300D
</option>
<option>
HP LaserJet 2300DN
</option>
<option>
HP LaserJet 2300DTN
</option>
</feature>
<feature editable="FALSE">
BothDuplexersOn
<current_option>FALSE</current_option>
<option>
FALSE
</option>
<option resource_id="7">
TRUE
</option>
</feature>
<!-- currently not supported in Wizard -->
<!-- ScaleFromLargePaper -->
<!--
<feature editable="TRUE" resource_id="1187">
ScaleFromLargePaper
<current_option>FALSE</current_option>
<option resource_id="10">
TRUE
</option>
<option resource_id="9">
FALSE
</option>
</feature>
-->
</physical>
<!-- !!!!!!!!!!!!!!!!!!!!!!!! PRINTING FEATURES !!!!!!!!!!!!!!!!!!!!!!!!!!!! -->
<printing resource_id="17">
<!-- TYPICAL FEATURES - (reverse order from display) -->
<!-- Default Paper Source Selection -->
<feature resource_id="400" caption_id="10018" typical="TRUE" lock="FALSE">
InputBin
<current_option>PrinterSelect</current_option>
<option resource_id="430">
PrinterSelect
</option>
<option resource_id="401">
ManualFeed
</option>
<option resource_id="408">
Tray1
</option>
<option resource_id="409">
Tray2
<constraint>Check_Tray2_Constraints_For_MediaTypes</constraint>
<constraint>Check_Tray2_Constraints_For_PaperSizes</constraint>
<constraint>Check_Tray2_Constraints_For_PaperSizes_ABS</constraint>
</option>
<option resource_id="20401">
Tray3_250
<constraint>Check_Tray3_250_Constraints_For_PaperSizes</constraint>
<constraint>Check_Tray3_250_Constraints_For_PaperSizes_ABS</constraint>
<constraint>Check_Tray3_250_Constraints_For_MediaTypes</constraint>
<constraint>Requires_Tray3_250_To_Be_Installed</constraint>
</option>
<option resource_id="446">
Tray3_500
<constraint>Check_Tray3_500_Constraints_For_PaperSizes</constraint>
<constraint>Check_Tray3_500_Constraints_For_PaperSizes_ABS</constraint>
<constraint>Check_Tray3_500_Constraints_For_MediaTypes</constraint>
<constraint>Requires_Tray3_500_To_Be_Installed</constraint>
</option>
</feature>
<!-- Default MediaType Selection -->
<feature resource_id="550" caption_id="10017" typical="TRUE" lock="FALSE">
MediaType
<current_option>AUTO</current_option>
<option resource_id="558">
AUTO
</option>
<option resource_id="559">
PLAIN
</option>
<option resource_id="560">
PREPRINTED
</option>
<option resource_id="561">
LETTERHEAD
</option>
<option resource_id="562">
TRANSPARENCY
<constraint>MediaType_AND_Tray3_500</constraint>
<constraint>Print_On_Both_Sides_Is_Not_Allowed_ABS</constraint>
</option>
<option resource_id="564">
PREPUNCHED
</option>
<option resource_id="565">
LABELS
<constraint>MediaType_AND_Tray2_250</constraint>
<constraint>MediaType_AND_Tray3_500</constraint>
<constraint>MediaType_AND_Tray3_250</constraint>
<constraint>Print_On_Both_Sides_Is_Not_Allowed_ABS</constraint>
</option>
<option resource_id="566">
BOND
</option>
<option resource_id="567">
RECYCLED
</option>
<option resource_id="568">
COLOR
</option>
<option resource_id="570">
CARDSTOCK
<constraint>MediaType_AND_Tray2_250</constraint>
<constraint>MediaType_AND_Tray3_500</constraint>
<constraint>MediaType_AND_Tray3_250</constraint>
<constraint>Print_On_Both_Sides_Is_Not_Allowed_ABS</constraint>
</option>
<option resource_id="555">
ROUGH
</option>
<option resource_id="551">
ENVELOPE
<constraint>MediaType_AND_Tray2_250</constraint>
<constraint>MediaType_AND_Tray3_500</constraint>
<constraint>MediaType_AND_Tray3_250</constraint>
<constraint>Print_On_Both_Sides_Is_Not_Allowed_ABS</constraint>
</option>
</feature>
<!-- Default Paper Size Selection -->
<feature resource_id="200" caption_id="10012" typical="TRUE">
PaperSize
<current_option>LETTER</current_option>
<option resource_id="209">
LETTER
<constraint>BookletTargetPaperSize_Cannot_Be_A4</constraint>
</option>
<option resource_id="213">
LEGAL
<constraint>PaperSize_AND_Tray3_500</constraint>
<constraint>BookletTargetPaperSize_Cannot_Be_LETTER</constraint>
<constraint>BookletTargetPaperSize_Cannot_Be_A4</constraint>
</option>
<option resource_id="215">
EXECUTIVE
<constraint>PaperSize_AND_Tray3_500</constraint>
<constraint>Check_BookletPrinting</constraint>
<constraint>ManualDuplex_Is_OK_BUT_AutoDuplex_Is_Not</constraint>
</option>
<option resource_id="217">
A4
<constraint>BookletTargetPaperSize_Cannot_Be_LETTER</constraint>
<constraint>BookletTargetPaperSize_Cannot_Be_LEGAL</constraint>
</option>
<option resource_id="219">
A5
<constraint>PaperSize_AND_Tray3_500</constraint>
<constraint>ManualDuplex_Is_OK_BUT_AutoDuplex_Is_Not</constraint>
<constraint>Check_BookletPrinting</constraint>
</option>
<option resource_id="228">
ENV_10
<constraint>PaperSize_AND_Tray2_250</constraint>
<constraint>PaperSize_AND_Tray3_500</constraint>
<constraint>PaperSize_AND_Tray3_250</constraint>
<constraint>Check_BookletPrinting</constraint>
<constraint>Print_On_Both_Sides_Is_Not_Allowed</constraint>
</option>
<option resource_id="236">
ENV_C5
<constraint>PaperSize_AND_Tray2_250</constraint>
<constraint>PaperSize_AND_Tray3_500</constraint>
<constraint>PaperSize_AND_Tray3_250</constraint>
<constraint>Check_BookletPrinting</constraint>
<constraint>Print_On_Both_Sides_Is_Not_Allowed</constraint>
</option>
<option resource_id="242">
ENV_B5
<constraint>PaperSize_AND_Tray2_250</constraint>
<constraint>PaperSize_AND_Tray3_500</constraint>
<constraint>PaperSize_AND_Tray3_250</constraint>
<constraint>Check_BookletPrinting</constraint>
<constraint>Print_On_Both_Sides_Is_Not_Allowed</constraint>
</option>
<option resource_id="235">
ENV_DL
<constraint>PaperSize_AND_Tray2_250</constraint>
<constraint>PaperSize_AND_Tray3_500</constraint>
<constraint>PaperSize_AND_Tray3_250</constraint>
<constraint>Check_BookletPrinting</constraint>
<constraint>Print_On_Both_Sides_Is_Not_Allowed</constraint>
</option>
<option resource_id="245">
ENV_MONARCH
<constraint>PaperSize_AND_Tray2_250</constraint>
<constraint>PaperSize_AND_Tray3_500</constraint>
<constraint>PaperSize_AND_Tray3_250</constraint>
<constraint>Check_BookletPrinting</constraint>
<constraint>Print_On_Both_Sides_Is_Not_Allowed</constraint>
</option>
<option resource_id="202">
B5
<constraint>PaperSize_AND_Tray3_500</constraint>
<constraint>ManualDuplex_Is_OK_BUT_AutoDuplex_Is_Not</constraint>
<constraint>Check_BookletPrinting</constraint>
</option>
<option resource_id="221">
B5_JIS
<constraint>PaperSize_AND_Tray3_500</constraint>
<constraint>ManualDuplex_Is_OK_BUT_AutoDuplex_Is_Not</constraint>
<constraint>Check_BookletPrinting</constraint>
</option>
<option resource_id="274">
DBL_JAPANESE_POSTCARD
<constraint>PaperSize_AND_Tray2_250</constraint>
<constraint>PaperSize_AND_Tray3_500</constraint>
<constraint>PaperSize_AND_Tray3_250</constraint>
<constraint>ManualDuplex_Is_OK_BUT_AutoDuplex_Is_Not</constraint>
<constraint>Check_BookletPrinting</constraint>
</option>
<option resource_id="327">
EXECUTIVE_JIS
<constraint>PaperSize_AND_Tray3_500</constraint>
<constraint>Check_BookletPrinting</constraint>
</option>
<option resource_id="208">
16K
<constraint>PaperSize_AND_Tray3_500</constraint>
<constraint>ManualDuplex_Is_OK_BUT_AutoDuplex_Is_Not</constraint>
<constraint>Check_BookletPrinting</constraint>
</option>
<!-- <option resource_id="356">
8_5X13
<constraint>PaperSize_AND_Tray2_250</constraint>
<constraint>PaperSize_AND_Tray3_500</constraint>
<constraint>PaperSize_AND_Tray3_250</constraint>
<constraint>Check_BookletPrinting</constraint>
</option> -->
</feature>
<!-- Default Print Quality Setting -->
<feature resource_id="760" caption_id="10019" typical="TRUE">
PrintQuality
<current_option>Default</current_option>
<option resource_id="3">
Default
</option>
<option resource_id="768">
Best
</option>
<option resource_id="769">
Normal
</option>
<option resource_id="" editable="FALSE">
Custom
</option>
</feature>
<!-- Default Orientation Setting -->
<feature resource_id="850" caption_id="10013" typical="TRUE">
Orientation
<current_option>Portrait</current_option>
<option resource_id="851">
Portrait
</option>
<option resource_id="852">
Landscape
</option>
<option resource_id="853">
RotatedPortrait
</option>
<option resource_id="854">
RotatedLandscape
</option>
</feature>
<feature editable="FALSE" typical="TRUE">
StraightPaperPath
<current_option>OFF</current_option>
<option>
OFF
</option>
<option>
ON
</option>
</feature>
<!-- Default for Print On Both Sides -->
<feature resource_id="1000" caption_id="10014" typical="TRUE" lock="FALSE">
Duplex
<current_option>FALSE</current_option>
<option resource_id="10">
TRUE
<constraint>Check_DuplexInstall_To_Enable_PrintOnBothSides</constraint>
<!-- <constraint>Check_LABELS_To_Enable_PrintOnBothSides</constraint>
<constraint>Check_TRANSPARENCY_To_Enable_PrintOnBothSides</constraint>
<constraint>Check_ENVELOPE_To_Enable_PrintOnBothSides</constraint> -->
<constraint>Check_MediaTypes_That_Cant_Be_Duplexed</constraint>
<constraint>Check_PaperSizes_That_Cant_Be_Duplexed</constraint>
<constraint>Check_EXECUTIVE_To_Enable_PrintOnBothSides</constraint>
<constraint>Check_EXECUTIVE_To_Enable_PrintOnBothSides_ABS</constraint>
<constraint>Check_A5_To_Enable_PrintOnBothSides</constraint>
<constraint>Check_A5_To_Enable_PrintOnBothSides_ABS</constraint>
<constraint>Check_16K_To_Enable_PrintOnBothSides</constraint>
<constraint>Check_16K_To_Enable_PrintOnBothSides_ABS</constraint>
<constraint>Check_B5_JIS_To_Enable_PrintOnBothSides</constraint>
<constraint>Check_B5_JIS_To_Enable_PrintOnBothSides_ABS</constraint>
<constraint>Check_B5_To_Enable_PrintOnBothSides</constraint>
<constraint>Check_B5_To_Enable_PrintOnBothSides_ABS</constraint>
<constraint>Check_DBL_POSTCARD_JIS_To_Enable_PrintOnBothSides</constraint>
<constraint>Check_DBL_POSTCARD_JIS_To_Enable_PrintOnBothSides_ABS</constraint>
<!-- DuplexEdge -->
<feature resource_id="1001" caption_id="10063" typical="TRUE">
DuplexEdge
<current_option>LongEdge</current_option>
<option resource_id="1002">
LongEdge
</option>
<option resource_id="1003">
ShortEdge
</option>
</feature>
</option>
<option resource_id="9">
FALSE
<constraint>Check_Booklet_To_Disable_PrintOnBothSides</constraint>
</option>
</feature>
<!-- ADVANCED FEATURES - (same order as display) -->
<!-- PageOrder -->
<feature resource_id="1130" caption_id="10015">
PageOrder
<current_option>FrontToBack</current_option>
<option resource_id="1135">
FrontToBack
</option>
<option resource_id="1136">
BackToFront
</option>
</feature>
<!-- All NUp Features-->
<!-- NUpChoice -->
<feature resource_id="1100" caption_id="10021">
NUpChoice
<current_option>OneUp</current_option>
<option resource_id="1101">
OneUp
</option>
<option resource_id="1102">
TwoUp
<constraint>Is_Booklet_On</constraint>
<constraint>PrintDocumentOn_Cannot_Be_On</constraint>
<constraint>Check_Scale_Equal_100</constraint>
<!-- NUpPageOrderChoice -->
<feature resource_id="1137" caption_id="10054">
NUpPageOrderChoice
<current_option>RightThenDown</current_option>
<option resource_id="1131">
RightThenDown
</option>
<option resource_id="1132">
DownThenRight
</option>
<option resource_id="1133">
LeftThenDown
</option>
<option resource_id="1134">
DownThenLeft
</option>
</feature>
<!-- NUpBordersChoice -->
<feature resource_id="1140" caption_id="10022">
NUpBordersChoice
<constraint>Is_Booklet_On</constraint>
<current_option>NoBorders</current_option>
<option resource_id="10">
PrintBorders
</option>
<option resource_id="9">
NoBorders
</option>
</feature>
</option>
<option resource_id="1103">
FourUp
<constraint>Is_Booklet_On</constraint>
<constraint>PrintDocumentOn_Cannot_Be_On</constraint>
<constraint>Check_Scale_Equal_100</constraint>
<!-- NUpPageOrderChoice -->
<feature resource_id="1137" caption_id="10054">
NUpPageOrderChoice
<current_option>RightThenDown</current_option>
<option resource_id="1131">
RightThenDown
</option>
<option resource_id="1132">
DownThenRight
</option>
<option resource_id="1133">
LeftThenDown
</option>
<option resource_id="1134">
DownThenLeft
</option>
</feature>
<!-- NUpBordersChoice -->
<feature resource_id="1140" caption_id="10022">
NUpBordersChoice
<current_option>PrintBorders</current_option>
<option resource_id="10">
PrintBorders
</option>
<option resource_id="9">
NoBorders
</option>
</feature>
</option>
<option resource_id="1104">
SixUp
<constraint>Is_Booklet_On</constraint>
<constraint>PrintDocumentOn_Cannot_Be_On</constraint>
<constraint>Check_Scale_Equal_100</constraint>
<!-- NUpPageOrderChoice -->
<feature resource_id="1137" caption_id="10054">
NUpPageOrderChoice
<current_option>RightThenDown</current_option>
<option resource_id="1131">
RightThenDown
</option>
<option resource_id="1132">
DownThenRight
</option>
<option resource_id="1133">
LeftThenDown
</option>
<option resource_id="1134">
DownThenLeft
</option>
</feature>
<!-- NUpBordersChoice -->
<feature resource_id="1140" caption_id="10022">
NUpBordersChoice
<current_option>PrintBorders</current_option>
<option resource_id="10">
PrintBorders
</option>
<option resource_id="9">
NoBorders
</option>
</feature>
</option>
<option resource_id="1105">
NineUp
<constraint>Is_Booklet_On</constraint>
<constraint>PrintDocumentOn_Cannot_Be_On</constraint>
<constraint>Check_Scale_Equal_100</constraint>
<!-- NUpPageOrderChoice -->
<feature resource_id="1137" caption_id="10054">
NUpPageOrderChoice
<current_option>RightThenDown</current_option>
<option resource_id="1131">
RightThenDown
</option>
<option resource_id="1132">
DownThenRight
</option>
<option resource_id="1133">
LeftThenDown
</option>
<option resource_id="1134">
DownThenLeft
</option>
</feature>
<!-- NUpBordersChoice -->
<feature resource_id="1140" caption_id="10022">
NUpBordersChoice
<current_option>PrintBorders</current_option>
<option resource_id="10">
PrintBorders
</option>
<option resource_id="9">
NoBorders
</option>
</feature>
</option>
<option resource_id="1106">
SixteenUp
<constraint>Is_Booklet_On</constraint>
<constraint>PrintDocumentOn_Cannot_Be_On</constraint>
<constraint>Check_Scale_Equal_100</constraint>
<!-- NUpPageOrderChoice -->
<feature resource_id="1137" caption_id="10054">
NUpPageOrderChoice
<current_option>RightThenDown</current_option>
<option resource_id="1131">
RightThenDown
</option>
<option resource_id="1132">
DownThenRight
</option>
<option resource_id="1133">
LeftThenDown
</option>
<option resource_id="1134">
DownThenLeft
</option>
</feature>
<!-- NUpBordersChoice -->
<feature resource_id="1140" caption_id="10022">
NUpBordersChoice
<current_option>PrintBorders</current_option>
<option resource_id="10">
PrintBorders
</option>
<option resource_id="9">
NoBorders
</option>
</feature>
</option>
</feature>
<!-- BookletPrintingChoice -->
<feature resource_id="1120" caption_id="10023">
BookletPrintingChoice
<current_option>OFF</current_option>
<option resource_id="14">
OFF
<constraint>Force_BookletTargetSize_To_None</constraint>
</option>
<option resource_id="1121">
LeftEdge
<constraint>Check_NUP</constraint>
<constraint>Check_Duplex_To_Allow_Booklet</constraint>
<constraint>Check_Scaling_To_Allow_Booklet</constraint>
<constraint>Check_Scale_Equal_100_To_Allow_Booklet</constraint>
<constraint>Check_PaperSizes_To_Allow_Booklet</constraint>
<constraint>Force_BookletTargetSize_To_Sizeis_Value1</constraint>
<constraint>Force_BookletTargetSize_To_Sizeis_Value2</constraint>
<constraint>Force_BookletTargetSize_To_Sizeis_Value3</constraint>
</option>
<option resource_id="1122">
RightEdge
<constraint>Check_NUP</constraint>
<constraint>Check_Duplex_To_Allow_Booklet</constraint>
<constraint>Check_Scaling_To_Allow_Booklet</constraint>
<constraint>Check_Scale_Equal_100_To_Allow_Booklet</constraint>
<constraint>Check_PaperSizes_To_Allow_Booklet</constraint>
<constraint>Force_BookletTargetSize_To_Sizeis_Value1</constraint>
<constraint>Force_BookletTargetSize_To_Sizeis_Value2</constraint>
<constraint>Force_BookletTargetSize_To_Sizeis_Value3</constraint>
</option>
</feature>
<!-- BookletTargetSize -->
<feature resource_id="1124" caption_id="10067">
BookletTargetSize
<current_option>None</current_option>
<option>
None
<!-- <constraint>Force_BookletPrintingDummyVariable_To_OFF</constraint> -->
</option>
<option resource_id="209" editable="FALSE">
LETTER
<constraint>When_BookletTargetSize_Is_Letter_PaperSize_Cannot_Be</constraint>
<constraint>Check_PaperSizes_To_Allow_Booklet</constraint>
</option>
<option resource_id="213" editable="FALSE">
LEGAL
<constraint>When_BookletTargetSize_Is_Legal_PaperSize_Cannot_Be</constraint>
<constraint>Check_PaperSizes_To_Allow_Booklet</constraint>
</option>
<option resource_id="217" editable="FALSE">
A4
<constraint>When_BookletTargetSize_Is_A4_PaperSize_Cannot_Be</constraint>
<constraint>Check_PaperSizes_To_Allow_Booklet</constraint>
</option>
</feature>
<!-- EconoMode -->
<feature resource_id="782" caption_id="10020">
EconoMode
<current_option>FALSE</current_option>
<option resource_id="10">
TRUE
</option>
<option resource_id="9">
FALSE
</option>
</feature>
<!-- TTAsBitmapSetting-->
<feature resource_id="1170" caption_id="10044">
TTAsBitmapSetting
<current_option>TTModeOutline</current_option>
<option resource_id="9">
TTModeOutline
</option>
<option resource_id="10">
TTModeBitmap
</option>
</feature>
<!-- TextAsBlack-->
<feature resource_id="901" caption_id="10043">
TextAsBlack
<current_option>FALSE</current_option>
<option resource_id="9">
FALSE
</option>
<option resource_id="10">
TRUE
</option>
</feature>
<!-- PrintDocumentOn -->
<feature resource_id="1182" caption_id="10025">
FitToOtherSizeChoice
<current_option>PrintActualSize</current_option>
<option resource_id="9">
PrintActualSize
<constraint>ForceScaleToFit_Off</constraint>
<constraint>Force_TargetPaperSize_To_Letter</constraint>
<constraint>Force_PaperSize_To_Letter</constraint>
</option>
<option resource_id="10">
FitToOtherSize
<constraint>Check_NUP</constraint>
<constraint>Check_Scale_Equal_100</constraint>
<constraint>Check_BookletPrinting</constraint>
<!--<constraint>FitToOtherSizeChoice_FitToOtherSize</constraint> -->
<!-- TargetSizeChoice-->
<feature resource_id="1185" caption_id="10012">
TargetSizeChoice
<current_option>LETTER</current_option>
<option resource_id="209">
LETTER
</option>
<option resource_id="213">
LEGAL
<constraint>PaperSize_AND_Tray3_500_ABS</constraint>
</option>
<option resource_id="215">
EXECUTIVE
<constraint>PaperSize_AND_Tray3_500_ABS</constraint>
<constraint>ManualDuplex_Is_OK_BUT_AutoDuplex_Is_Not_ABS</constraint>
</option>
<option resource_id="217">
A4
</option>
<option resource_id="219">
A5
<constraint>PaperSize_AND_Tray3_500_ABS</constraint>
<constraint>ManualDuplex_Is_OK_BUT_AutoDuplex_Is_Not_ABS</constraint>
</option>
<option resource_id="228">
ENV_10
<constraint>PaperSize_AND_Tray2_250_ABS</constraint>
<constraint>PaperSize_AND_Tray3_500_ABS</constraint>
<constraint>PaperSize_AND_Tray3_250_ABS</constraint>
<constraint>Print_On_Both_Sides_Is_Not_Allowed_ABS</constraint>
</option>
<option resource_id="236">
ENV_C5
<constraint>PaperSize_AND_Tray2_250_ABS</constraint>
<constraint>PaperSize_AND_Tray3_500_ABS</constraint>
<constraint>PaperSize_AND_Tray3_250_ABS</constraint>
<constraint>Print_On_Both_Sides_Is_Not_Allowed_ABS</constraint>
</option>
<option resource_id="242">
ENV_B5
<constraint>PaperSize_AND_Tray2_250_ABS</constraint>
<constraint>PaperSize_AND_Tray3_500_ABS</constraint>
<constraint>PaperSize_AND_Tray3_250_ABS</constraint>
<constraint>Print_On_Both_Sides_Is_Not_Allowed_ABS</constraint>
</option>
<option resource_id="235">
ENV_DL
<constraint>PaperSize_AND_Tray2_250_ABS</constraint>
<constraint>PaperSize_AND_Tray3_500_ABS</constraint>
<constraint>PaperSize_AND_Tray3_250_ABS</constraint>
<constraint>Print_On_Both_Sides_Is_Not_Allowed_ABS</constraint>
</option>
<option resource_id="245">
ENV_MONARCH
<constraint>PaperSize_AND_Tray2_250_ABS</constraint>
<constraint>PaperSize_AND_Tray3_500_ABS</constraint>
<constraint>PaperSize_AND_Tray3_250_ABS</constraint>
<constraint>Print_On_Both_Sides_Is_Not_Allowed_ABS</constraint>
</option>
<option resource_id="202">
B5
<constraint>PaperSize_AND_Tray3_500_ABS</constraint>
<constraint>ManualDuplex_Is_OK_BUT_AutoDuplex_Is_Not_ABS</constraint>
</option>
<option resource_id="221">
B5_JIS
<constraint>PaperSize_AND_Tray3_500_ABS</constraint>
<constraint>ManualDuplex_Is_OK_BUT_AutoDuplex_Is_Not_ABS</constraint>
</option>
<option resource_id="274">
DBL_JAPANESE_POSTCARD
<constraint>PaperSize_AND_Tray2_250_ABS</constraint>
<constraint>PaperSize_AND_Tray3_500_ABS</constraint>
<constraint>PaperSize_AND_Tray3_250_ABS</constraint>
<constraint>ManualDuplex_Is_OK_BUT_AutoDuplex_Is_Not_ABS</constraint>
</option>
<option resource_id="327">
EXECUTIVE_JIS
<constraint>PaperSize_AND_Tray3_500_ABS</constraint>
</option>
<option resource_id="208">
16K
<constraint>PaperSize_AND_Tray3_500_ABS</constraint>
<constraint>ManualDuplex_Is_OK_BUT_AutoDuplex_Is_Not_ABS</constraint>
</option>
<!-- <option resource_id="356">
8_5X13
<constraint>PaperSize_AND_Tray2_250_ABS</constraint>
<constraint>PaperSize_AND_Tray3_500_ABS</constraint>
<constraint>PaperSize_AND_Tray3_250_ABS</constraint>
</option> -->
</feature>
</option>
</feature>
<!-- "Scale To Fit" ON/OFF -->
<feature resource_id="1183" caption_id="10026">
ScalePageChoice
<current_option>FitWithoutScaling</current_option>
<option resource_id="10">
ScaleToFit
<constraint>ScaleToFit_Must_Be_Actual_Size</constraint>
</option>
<option resource_id="9">
FitWithoutScaling
</option>
</feature>
<!-- Percent of Normal Size: -->
<feature resource_id="1184" caption_id="10027" range_low="25" range_hi="400">
ScaleChoice
<current_option>100</current_option>
<constraint>Is_Booklet_On</constraint>
<constraint>PrintDocumentOn_Cannot_Be_On</constraint>
<constraint>Check_NUP</constraint>
</feature>
<!-- Watermarks -->
<feature resource_id="2000" caption_id="10028">
Watermarks
<current_option>None</current_option>
<option resource_id="8">
None
</option>
<option resource_id="2002">
Confidential
<feature resource_id="2005" caption_id="10032">
WMFont
<current_option>Arial</current_option>
<option>
Times New Roman
</option>
<option>
Courier New
</option>
<option>
Arial
</option>
</feature>
<feature resource_id="2007" caption_id="10034">
WMShadeLevel
<current_option>VeryLight</current_option>
<option resource_id="2008">
Lightest
</option>
<option resource_id="2009">
VeryLight
</option>
<option resource_id="2010">
Light
</option>
<option resource_id="2011">
MediumLight
</option>
<option resource_id="2012">
Medium
</option>
<option resource_id="2013">
MediumDark
</option>
<option resource_id="2014">
Dark
</option>
<option resource_id="2015">
VeryDark
</option>
<option resource_id="2016">
Darkest
</option>
</feature>
<feature resource_id="2017" caption_id="10034">
WMColor
<current_option>Gray</current_option>
<option resource_id="2018">
Gray
</option>
</feature>
<feature resource_id="2004" caption_id="10029">
WMFirstPageOnly
<current_option>AllPages</current_option>
<option resource_id="9">
AllPages
</option>
<!--<option resource_id="">
NoPages
</option> -->
<option resource_id="10">
FirstPageOnly
</option>
</feature>
<feature resource_id="2026" caption_id="10036">
WMFontStyle
<current_option>Regular</current_option>
<option resource_id="2027">
Regular
</option>
<option resource_id="2028">
Bold
</option>
<option resource_id="2029">
Italic
</option>
<option resource_id="2030">
BoldItalic
</option>
<!-- Taken out since the Mombi driver does not
support them. 4/18/02
<option resource_id="2031">
Underline
</option>
<option resource_id="2032">
Strikeout
</option>
-->
</feature>
<feature resource_id="2033" caption_id="10031">
WMFontEscapement
<current_option>Diagonal</current_option>
<option resource_id="3035">
Diagonal
</option>
<option resource_id="2034">
Horizontal
</option>
<option resource_id="15">
Custom
<feature range_low="0" range_hi="360" resource_id="2033" caption_id="10031">
WMCustomAngle
<current_option>52</current_option>
</feature>
</option>
</feature>
</option>
<option resource_id="2001">
Draft
<feature resource_id="2005" caption_id="10032">
WMFont
<current_option>Arial</current_option>
<option>
Times New Roman
</option>
<option>
Courier New
</option>
<option>
Arial
</option>
</feature>
<feature resource_id="2007" caption_id="10034">
WMShadeLevel
<current_option>VeryLight</current_option>
<option resource_id="2008">
Lightest
</option>
<option resource_id="2009">
VeryLight
</option>
<option resource_id="2010">
Light
</option>
<option resource_id="2011">
MediumLight
</option>
<option resource_id="2012">
Medium
</option>
<option resource_id="2013">
MediumDark
</option>
<option resource_id="2014">
Dark
</option>
<option resource_id="2015">
VeryDark
</option>
<option resource_id="2016">
Darkest
</option>
</feature>
<feature resource_id="2017" caption_id="10034">
WMColor
<current_option>Gray</current_option>
<option resource_id="2018">
Gray
</option>
</feature>
<feature resource_id="2004" caption_id="10029">
WMFirstPageOnly
<current_option>AllPages</current_option>
<option resource_id="9">
AllPages
</option>
<!--<option resource_id="">
NoPages
</option> -->
<option resource_id="10">
FirstPageOnly
</option>
</feature>
<feature resource_id="2026" caption_id="10036">
WMFontStyle
<current_option>Regular</current_option>
<option resource_id="2027">
Regular
</option>
<option resource_id="2028">
Bold
</option>
<option resource_id="2029">
Italic
</option>
<option resource_id="2030">
BoldItalic
</option>
<!-- Taken out since the Mombi driver does not
support them. 4/18/02
<option resource_id="2031">
Underline
</option>
<option resource_id="2032">
Strikeout
</option> -->
</feature>
<feature resource_id="2033" caption_id="10031">
WMFontEscapement
<current_option>Diagonal</current_option>
<option resource_id="3035">
Diagonal
</option>
<option resource_id="2034">
Horizontal
</option>
<option resource_id="15">
Custom
<feature range_low="0" range_hi="360" resource_id="2033" caption_id="10031">
WMCustomAngle
<current_option>52</current_option>
</feature>
</option>
</feature>
</option>
<option resource_id="2003">
Sample
<feature resource_id="2005" caption_id="10032">
WMFont
<current_option>Arial</current_option>
<option>
Times New Roman
</option>
<option>
Courier New
</option>
<option>
Arial
</option>
</feature>
<feature resource_id="2007" caption_id="10034">
WMShadeLevel
<current_option>VeryLight</current_option>
<option resource_id="2008">
Lightest
</option>
<option resource_id="2009">
VeryLight
</option>
<option resource_id="2010">
Light
</option>
<option resource_id="2011">
MediumLight
</option>
<option resource_id="2012">
Medium
</option>
<option resource_id="2013">
MediumDark
</option>
<option resource_id="2014">
Dark
</option>
<option resource_id="2015">
VeryDark
</option>
<option resource_id="2016">
Darkest
</option>
</feature>
<feature resource_id="2017" caption_id="10034">
WMColor
<current_option>Gray</current_option>
<option resource_id="2018">
Gray
</option>
</feature>
<feature resource_id="2004" caption_id="10029">
WMFirstPageOnly
<current_option>AllPages</current_option>
<option resource_id="9">
AllPages
</option>
<!--<option resource_id="">
NoPages
</option> -->
<option resource_id="10">
FirstPageOnly
</option>
</feature>
<feature resource_id="2026" caption_id="10036">
WMFontStyle
<current_option>Regular</current_option>
<option resource_id="2027">
Regular
</option>
<option resource_id="2028">
Bold
</option>
<option resource_id="2029">
Italic
</option>
<option resource_id="2030">
BoldItalic
</option>
<!-- Taken out since Mombi driver does not support them.4/18/02
<option resource_id="2031">
Underline
</option>
<option resource_id="2032">
Strikeout
</option>-->
</feature>
<feature resource_id="2033" caption_id="10031">
WMFontEscapement
<current_option>Diagonal</current_option>
<option resource_id="3035">
Diagonal
</option>
<option resource_id="2034">
Horizontal
</option>
<option resource_id="15">
Custom
<feature range_low="0" range_hi="360" resource_id="2033" caption_id="10031">
WMCustomAngle
<current_option>52</current_option>
</feature>
</option>
</feature>
</option>
</feature>
<!-- Copies -->
<feature resource_id="1021" caption_id="10037" range_low="1" range_hi="9999">
Copies
<current_option>1</current_option>
</feature>
<!-- Halftone (UNIDRV)
<feature resource_id="903" caption_id="10038">
Halftone
<current_option>HT_PATSIZE_AUTO</current_option>
<option resource_id="573">
HT_PATSIZE_AUTO
</option>
<option resource_id="904">
HT_PATSIZE_SUPERCELL_M
</option>
<option resource_id="905">
HT_PATSIZE_6x6_M
</option>
<option resource_id="906">
HT_PATSIZE_8x8_M
</option>
</feature> -->
<!-- LanguageLevel (PSCRIPT) -->
<feature resource_id="5001" caption_id="10064">
LanguageLevel
<current_option>3</current_option>
<option>
1
</option>
<option>
2
</option>
<option>
3
</option>
</feature>
<!-- NegativePrint (PSCRIPT)-->
<feature resource_id="5005" caption_id="10066">
NegativePrint
<current_option>FALSE</current_option>
<option resource_id="9">
FALSE
</option>
<option resource_id="10">
TRUE
</option>
</feature>
<!-- MirrorPrint (PSCRIPT)-->
<feature resource_id="5006" caption_id="10065">
MirrorPrint
<current_option>FALSE</current_option>
<option resource_id="9">
FALSE
</option>
<option resource_id="10">
TRUE
</option>
</feature>
</printing>
<!-- CONSTRAINTS SECTION "Physical" features -->
<constraints>
<constraint>
Force_Duplex_Bundle_Var_BASE
<requires>
<item force="TRUE">physical/ModelSupportingDuplexer == HP LaserJet 2300</item>
</requires>
</constraint>
<constraint>
Force_Duplex_Bundle_Var_L
<requires>
<item force="TRUE">physical/ModelSupportingDuplexer == HP LaserJet 2300L</item>
</requires>
</constraint>
<constraint>
Force_Duplex_Bundle_Var_N
<requires>
<item force="TRUE">physical/ModelSupportingDuplexer == HP LaserJet 2300N</item>
</requires>
</constraint>
<constraint>
Force_Duplex_Bundle_Var_D
<requires>
<item force="TRUE">physical/ModelSupportingDuplexer == HP LaserJet 2300D</item>
</requires>
</constraint>
<constraint>
Force_Duplex_Bundle_Var_DN
<requires>
<item force="TRUE">physical/ModelSupportingDuplexer == HP LaserJet 2300DN</item>
</requires>
</constraint>
<constraint>
Force_Duplex_Bundle_Var_DTN
<requires>
<item force="TRUE">physical/ModelSupportingDuplexer == HP LaserJet 2300DTN</item>
</requires>
</constraint>
<constraint>
BundleDoesNotSupportAutoDuplexCapability
<forbids>
<item>physical/ModelSupportingDuplexer == HP LaserJet 2300</item>
<item>physical/ModelSupportingDuplexer == HP LaserJet 2300N</item>
<item>physical/ModelSupportingDuplexer == HP LaserJet 2300L</item>
</forbids>
</constraint>
<constraint>
Force_M32_Bundle_Var_BASE
<requires>
<item force="TRUE">physical/ModelSupportingMem == HP LaserJet 2300</item>
</requires>
</constraint>
<constraint>
Force_M32_Bundle_Var_L
<requires>
<item force="TRUE">physical/ModelSupportingMem == HP LaserJet 2300L</item>
</requires>
</constraint>
<constraint>
Force_M32_Bundle_Var_N
<requires>
<item force="TRUE">physical/ModelSupportingMem == HP LaserJet 2300N</item>
</requires>
</constraint>
<constraint>
Force_M32_Bundle_Var_D
<requires>
<item force="TRUE">physical/ModelSupportingMem == HP LaserJet 2300D</item>
</requires>
</constraint>
<constraint>
Force_M32_Bundle_Var_DN
<requires>
<item force="TRUE">physical/ModelSupportingMem == HP LaserJet 2300DN</item>
</requires>
</constraint>
<constraint>
Force_M32_Bundle_Var_DTN
<requires>
<item force="TRUE">physical/ModelSupportingMem == HP LaserJet 2300DTN</item>
</requires>
</constraint>
<constraint>
BundleDoesNotSupportM32Capability
<forbids>
<item>physical/ModelSupportingMem == HP LaserJet 2300N</item>
<item>physical/ModelSupportingMem == HP LaserJet 2300D</item>
<item>physical/ModelSupportingMem == HP LaserJet 2300DN</item>
<item>physical/ModelSupportingMem == HP LaserJet 2300DTN</item>
</forbids>
</constraint>
<constraint>
BundleDoesNotSupportM304Capability
<forbids>
<item>physical/ModelSupportingMem == HP LaserJet 2300</item>
<item>physical/ModelSupportingMem == HP LaserJet 2300L</item>
</forbids>
</constraint>
<constraint>
ForceBothDuplexersVarTRUE1
<requires>
<item>physical/ManualDuplex == Disabled</item>
</requires>
<requires>
<item force="TRUE">physical/BothDuplexersOn == TRUE</item>
</requires>
</constraint>
<constraint>
ForceBothDuplexersVarTRUE2
<requires>
<item>physical/DuplexUnit == NotInstalled</item>
</requires>
<requires>
<item force="TRUE">physical/BothDuplexersOn == TRUE</item>
</requires>
</constraint>
<constraint>
ForceBothDuplexersVarFALSE
<requires>
<item force="TRUE">physical/BothDuplexersOn == FALSE</item>
</requires>
</constraint>
<!-- When Enabling Mopying -->
<constraint>
Make_Sure_48MB_Is_Installed
<forbids>
<item>physical/Memory == 32</item>
</forbids>
</constraint>
<constraint>
MakeSureMopyingIsNotEnabled
<forbids>
<item>physical/DeviceIsMopier == Installed</item>
</forbids>
</constraint>
<constraint>
Make_Sure_Mopier_Is_Installed
<requires>
<item>physical/DeviceIsMopier == Installed</item>
</requires>
</constraint>
<constraint>
Force_Job_Storage_On
<requires>
<item force="TRUE">physical/JobRetention == Enabled</item>
</requires>
</constraint>
<constraint>
Force_Job_Storage_Off
<requires>
<item force="TRUE">physical/JobRetention == Disabled</item>
</requires>
</constraint>
<!-- Bundle Option: Memory -->
<constraint>
Bundle_Memory_Default_Low
<requires>
<item force="TRUE">physical/Memory == 32</item>
</requires>
</constraint>
<constraint>
Bundle_Memory_Default_High
<requires>
<item force="TRUE">physical/Memory == 48</item>
</requires>
</constraint>
<!-- Bundle Option: Mopier -->
<constraint>
Bundle_Mopier_NotInstalled
<requires>
<item force="TRUE">physical/DeviceIsMopier == NotInstalled</item>
</requires>
</constraint>
<constraint>
Bundle_Mopier_Installed
<requires>
<item force="TRUE">physical/DeviceIsMopier == Installed</item>
</requires>
</constraint>
<!-- Bundle Option: Duplex Unit -->
<constraint>
Bundle_Duplex_Unit_NotInstalled
<requires>
<item force="TRUE">physical/DuplexUnit == NotInstalled</item>
</requires>
</constraint>
<constraint>
Bundle_Duplex_Unit_Installed
<requires>
<item force="TRUE">physical/DuplexUnit == Installed</item>
</requires>
</constraint>
<!-- Bundle Option: AllowManualDuplexing -->
<constraint>
Bundle_AllowManualDuplexing_Disabled
<requires>
<item force="TRUE">physical/ManualDuplex == Disabled</item>
</requires>
</constraint>
<constraint>
Bundle_AllowManualDuplexing_Enabled
<requires>
<item force="TRUE">physical/ManualDuplex == Enabled</item>
</requires>
</constraint>
<!-- Bundle Option: Trays -->
<constraint OnExportOnly="TRUE">
Bundle_Tray3_Default_500
<requires>
<item force="TRUE">physical/OptionalPaperSources == C7065</item>
<item force="TRUE">physical/Tray3 == Tray3_500</item>
</requires>
</constraint>
<constraint OnExportOnly="TRUE">
Bundle_Tray3_Default_None
<requires>
<item force="TRUE">physical/OptionalPaperSources == None</item>
<item force="TRUE">physical/Tray3 == NotInstalled</item>
</requires>
</constraint>
<!-- When an Optional Paper Source is selected,
set TrayX for Mombi drivers -->
<constraint OnExportOnly="TRUE">
Set_Tray3_To_NotInstalled
<requires>
<item force="TRUE">physical/Tray3 == NotInstalled</item>
</requires>
</constraint>
<constraint OnExportOnly="TRUE">
Set_Tray3_To_250_Sheet
<requires>
<item force="TRUE">physical/Tray3 == Tray3_250</item>
</requires>
</constraint>
<constraint OnExportOnly="TRUE">
Set_Tray3_To_500_Sheet
<requires>
<item force="TRUE">physical/Tray3 == Tray3_500</item>
</requires>
</constraint>
<!-- Paper Source to None -->
<constraint>
Check_InputBin_For_Selected_Trays
<forbids>
<item>printing/InputBin == Tray3_250</item>
<item>printing/InputBin == Tray3_500</item>
</forbids>
</constraint>
<!-- Paper Source to 250 Sheet -->
<constraint>
Check_InputBin_For_500_Sheet
<forbids>
<item>printing/InputBin == Tray3_500</item>
</forbids>
</constraint>
<!-- Paper Source to 500 Sheet -->
<constraint>
Check_InputBin_For_250_Sheet
<forbids>
<item>printing/InputBin == Tray3_250</item>
</forbids>
</constraint>
<!-- AllowManualDuplexing and Duplex Unit -->
<constraint>
PrintOnBothSides_Cannot_Be_On_Auto
<forbids>
<item>physical/ManualDuplex == Disabled</item>
</forbids>
<forbids>
<item>printing/Duplex == TRUE</item>
</forbids>
</constraint>
<constraint>
PrintOnBothSides_Cannot_Be_On_Man
<requires>
<item force="TRUE">printing/Duplex == FALSE</item>
</requires>
</constraint>
<!-- NEW -->
<constraint>
ForcePrintOnBothSidesOff
<requires>
<item force="TRUE">printing/Duplex == FALSE</item>
</requires>
</constraint>
<constraint>
AllowManualDuplexing_Cannot_Be_On
<forbids>
<item>physical/ManualDuplex == Enabled</item>
</forbids>
</constraint>
<constraint>
DuplexUnit_Cannot_Be_On
<forbids>
<item>physical/DuplexUnit == Installed</item>
</forbids>
</constraint>
<!-- CONSTRAINTS SECTION "Properties" features -->
<!-- Trays vs. Media Types and Paper Sizes -->
<constraint>
Check_Tray2_Constraints_For_MediaTypes
<forbids>
<item>printing/MediaType == LABELS</item>
<item>printing/MediaType == ENVELOPE</item>
<item>printing/MediaType == CARDSTOCK</item>
</forbids>
</constraint>
<constraint>
Check_Tray2_Constraints_For_PaperSizes
<forbids>
<item>printing/FitToOtherSizeChoice == PrintActualSize</item>
</forbids>
<forbids>
<item>printing/PaperSize == DBL_JAPANESE_POSTCARD</item>
<item>printing/PaperSize == ENV_10</item>
<item>printing/PaperSize == ENV_MONARCH</item>
<item>printing/PaperSize == ENV_C5</item>
<item>printing/PaperSize == ENV_DL</item>
<item>printing/PaperSize == ENV_B5</item>
<!-- <item>printing/PaperSize == 8_5X13</item> -->
</forbids>
</constraint>
<constraint>
Check_Tray2_Constraints_For_PaperSizes_ABS
<forbids>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == DBL_JAPANESE_POSTCARD</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == ENV_10</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == ENV_MONARCH</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == ENV_C5</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == ENV_DL</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == ENV_B5</item>
<!-- <item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == 8_5X13</item> -->
</forbids>
</constraint>
<!-- -->
<constraint>
Check_Tray3_250_Constraints_For_MediaTypes
<forbids>
<item>printing/FitToOtherSizeChoice == PrintActualSize</item>
</forbids>
<forbids>
<item>printing/MediaType == LABELS</item>
<item>printing/MediaType == ENVELOPE</item>
<item>printing/MediaType == CARDSTOCK</item>
</forbids>
</constraint>
<constraint>
Check_Tray3_250_Constraints_For_PaperSizes
<forbids>
<item>printing/FitToOtherSizeChoice == PrintActualSize</item>
</forbids>
<forbids>
<item>printing/PaperSize == DBL_JAPANESE_POSTCARD</item>
<item>printing/PaperSize == ENV_10</item>
<item>printing/PaperSize == ENV_MONARCH</item>
<item>printing/PaperSize == ENV_C5</item>
<item>printing/PaperSize == ENV_DL</item>
<item>printing/PaperSize == ENV_B5</item>
<!-- <item>printing/PaperSize == 8_5X13</item> -->
</forbids>
</constraint>
<constraint>
Check_Tray3_250_Constraints_For_PaperSizes_ABS
<forbids>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == DBL_JAPANESE_POSTCARD</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == ENV_10</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == ENV_MONARCH</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == ENV_C5</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == ENV_DL</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == ENV_B5</item>
<!-- <item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == 8_5X13</item> -->
</forbids>
</constraint>
<!-- -->
<constraint>
Check_Tray3_500_Constraints_For_MediaTypes
<forbids>
<item>printing/MediaType == LABELS</item>
<item>printing/MediaType == TRANSPARANCY</item>
<item>printing/MediaType == CARDSTOCK</item>
<item>printing/MediaType == ENVELOPE</item>
</forbids>
</constraint>
<constraint>
Check_Tray3_500_Constraints_For_PaperSizes
<forbids>
<item>printing/FitToOtherSizeChoice == PrintActualSize</item>
</forbids>
<forbids>
<item>printing/PaperSize == LEGAL</item>
<item>printing/PaperSize == EXECUTIVE</item>
<item>printing/PaperSize == A5</item>
<item>printing/PaperSize == B5_JIS</item>
<item>printing/PaperSize == B5</item>
<item>printing/PaperSize == 16K</item>
<item>printing/PaperSize == DBL_JAPANESE_POSTCARD</item>
<item>printing/PaperSize == ENV_10</item>
<item>printing/PaperSize == ENV_MONARCH</item>
<item>printing/PaperSize == ENV_C5</item>
<item>printing/PaperSize == ENV_DL</item>
<item>printing/PaperSize == ENV_B5</item>
<item>printing/PaperSize == EXECUTIVE_JIS</item>
<!-- <item>printing/PaperSize == 8_5X13</item> -->
</forbids>
</constraint>
<constraint>
Check_Tray3_500_Constraints_For_PaperSizes_ABS
<forbids>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == LEGAL</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == EXECUTIVE</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == A5</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == B5_JIS</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == B5</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == 16K</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == DBL_JAPANESE_POSTCARD</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == ENV_10</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == ENV_MONARCH</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == ENV_C5</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == ENV_DL</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == ENV_B5</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == EXECUTIVE_JIS</item>
<!-- <item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == 8_5X13</item> -->
</forbids>
</constraint>
<!-- Tray 3 Must Be 250 sheet and Installed for Mombi -->
<constraint OnExportOnly="TRUE">
Requires_Tray3_250_To_Be_Installed
<requires>
<item>physical/OptionalPaperSources == C4793</item>
<item>physical/Tray3 == Tray3_250</item>
</requires>
</constraint>
<!-- Tray 3 Must Be 500 sheet and Installed for Mombi -->
<constraint OnExportOnly="TRUE">
Requires_Tray3_500_To_Be_Installed
<requires>
<item>physical/OptionalPaperSources == C7065</item>
<item>physical/Tray3 == Tray3_500</item>
</requires>
</constraint>
<!-- MediaType Selection -->
<constraint>
MediaType_AND_Tray2_250
<forbids>
<item>printing/InputBin == Tray2</item>
</forbids>
</constraint>
<constraint>
MediaType_AND_Tray3_250
<forbids>
<item>printing/InputBin == Tray3_250</item>
</forbids>
</constraint>
<constraint>
MediaType_AND_Tray3_500
<forbids>
<item>printing/InputBin == Tray3_500</item>
</forbids>
</constraint>
<constraint>
Print_On_Both_Sides_Is_Not_Allowed
<forbids>
<item>printing/FitToOtherSizeChoice == PrintActualSize</item>
</forbids>
<forbids>
<item>printing/Duplex == True</item>
</forbids>
</constraint>
<constraint>
Print_On_Both_Sides_Is_Not_Allowed_ABS
<forbids>
<item>printing/Duplex == True</item>
</forbids>
</constraint>
<!-- Paper Size Selection -->
<constraint>
PaperSize_AND_Tray2_250
<forbids>
<item>printing/FitToOtherSizeChoice == PrintActualSize</item>
</forbids>
<forbids>
<item>printing/InputBin == Tray2</item>
</forbids>
</constraint>
<constraint>
PaperSize_AND_Tray3_250
<forbids>
<item>printing/FitToOtherSizeChoice == PrintActualSize</item>
</forbids>
<forbids>
<item>printing/InputBin == Tray3_250</item>
</forbids>
</constraint>
<constraint>
PaperSize_AND_Tray3_500
<forbids>
<item>printing/FitToOtherSizeChoice == PrintActualSize</item>
</forbids>
<forbids>
<item>printing/InputBin == Tray3_500</item>
</forbids>
</constraint>
<constraint>
PaperSize_AND_Tray2_250_ABS
<forbids>
<item>printing/InputBin == Tray2</item>
</forbids>
</constraint>
<constraint>
PaperSize_AND_Tray3_250_ABS
<forbids>
<item>printing/InputBin == Tray3_250</item>
</forbids>
</constraint>
<constraint>
PaperSize_AND_Tray3_500_ABS
<forbids>
<item>printing/InputBin == Tray3_500</item>
</forbids>
</constraint>
<!-- Constaints For "Print On Both Sides" Selection -->
<constraint>
Check_DuplexInstall_To_Enable_PrintOnBothSides
<requires>
<item>physical/ManualDuplex == Enabled</item>
</requires>
<requires>
<item>physical/DuplexUnit == Installed</item>
</requires>
</constraint>
<!-- -->
<!-- Does not apply to KF
<constraint>
Check_LABELS_To_Enable_PrintOnBothSides
<requires>
<item>physical/ManualDuplex == Enabled</item>
</requires>
<requires>
<item>physical/DuplexUnit == Installed</item>
<item>printing/MediaType != LABELS</item>
</requires>
</constraint>
<constraint>
Check_TRANSPARENCY_To_Enable_PrintOnBothSides
<requires>
<item>physical/ManualDuplex == Enabled</item>
</requires>
<requires>
<item>physical/DuplexUnit == Installed</item>
<item>printing/MediaType != TRANSPARENCY</item>
</requires>
</constraint>
<constraint>
Check_ENVELOPE_To_Enable_PrintOnBothSides
<requires>
<item>physical/ManualDuplex == Enabled</item>
</requires>
<requires>
<item>physical/DuplexUnit == Installed</item>
<item>printing/MediaType != ENVELOPE</item>
</requires>
</constraint> -->
<!-- -->
<constraint>
Check_MediaTypes_That_Cant_Be_Duplexed
<forbids>
<item>printing/MediaType == TRANSPARENCY</item>
<item>printing/MediaType == LABELS</item>
<item>printing/MediaType == ENVELOPE</item>
</forbids>
</constraint>
<constraint>
Check_PaperSizes_That_Cant_Be_Duplexed
<forbids>
<item>printing/PaperSize == ENV_10</item>
<item>printing/PaperSize == ENV_MONARCH</item>
<item>printing/PaperSize == ENV_C5</item>
<item>printing/PaperSize == ENV_DL</item>
<item>printing/PaperSize == ENV_B5</item>
</forbids>
</constraint>
<!-- For checking PrintOnBothSides -->
<constraint>
Check_EXECUTIVE_To_Enable_PrintOnBothSides
<requires>
<item>printing/FitToOtherSizeChoice == FitToOtherSize</item>
</requires>
<requires>
<item>physical/ManualDuplex == Enabled</item>
</requires>
<requires>
<item>physical/DuplexUnit == Installed</item>
<item>printing/PaperSize != EXECUTIVE</item>
</requires>
</constraint>
<constraint>
Check_EXECUTIVE_To_Enable_PrintOnBothSides_ABS
<requires>
<item>physical/ManualDuplex == Enabled</item>
</requires>
<requires>
<item>physical/DuplexUnit == Installed</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice != EXECUTIVE</item>
</requires>
</constraint>
<!-- -->
<constraint>
Check_A5_To_Enable_PrintOnBothSides
<requires>
<item>printing/FitToOtherSizeChoice == FitToOtherSize</item>
</requires>
<requires>
<item>physical/ManualDuplex == Enabled</item>
</requires>
<requires>
<item>physical/DuplexUnit == Installed</item>
<item>printing/PaperSize != A5</item>
</requires>
</constraint>
<constraint>
Check_A5_To_Enable_PrintOnBothSides_ABS
<requires>
<item>physical/ManualDuplex == Enabled</item>
</requires>
<requires>
<item>physical/DuplexUnit == Installed</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice != A5</item>
</requires>
</constraint>
<!-- -->
<constraint>
Check_B5_JIS_To_Enable_PrintOnBothSides
<requires>
<item>printing/FitToOtherSizeChoice == FitToOtherSize</item>
</requires>
<requires>
<item>physical/ManualDuplex == Enabled</item>
</requires>
<requires>
<item>physical/DuplexUnit == Installed</item>
<item>printing/PaperSize != B5_JIS</item>
</requires>
</constraint>
<constraint>
Check_B5_JIS_To_Enable_PrintOnBothSides_ABS
<requires>
<item>physical/ManualDuplex == Enabled</item>
</requires>
<requires>
<item>physical/DuplexUnit == Installed</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice != B5_JIS</item>
</requires>
</constraint>
<!-- -->
<constraint>
Check_B5_To_Enable_PrintOnBothSides
<requires>
<item>printing/FitToOtherSizeChoice == FitToOtherSize</item>
</requires>
<requires>
<item>physical/ManualDuplex == Enabled</item>
</requires>
<requires>
<item>physical/DuplexUnit == Installed</item>
<item>printing/PaperSize != B5</item>
</requires>
</constraint>
<constraint>
Check_B5_To_Enable_PrintOnBothSides_ABS
<requires>
<item>physical/ManualDuplex == Enabled</item>
</requires>
<requires>
<item>physical/DuplexUnit == Installed</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice != B5</item>
</requires>
</constraint>
<!-- -->
<constraint>
Check_16K_To_Enable_PrintOnBothSides
<requires>
<item>printing/FitToOtherSizeChoice == FitToOtherSize</item>
</requires>
<requires>
<item>physical/ManualDuplex == Enabled</item>
</requires>
<requires>
<item>physical/DuplexUnit == Installed</item>
<item>printing/PaperSize != 16K</item>
</requires>
</constraint>
<constraint>
Check_16K_To_Enable_PrintOnBothSides_ABS
<requires>
<item>physical/ManualDuplex == Enabled</item>
</requires>
<requires>
<item>physical/DuplexUnit == Installed</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice != 16K</item>
</requires>
</constraint>
<!-- -->
<constraint>
Check_DBL_POSTCARD_JIS_To_Enable_PrintOnBothSides
<requires>
<item>printing/FitToOtherSizeChoice == FitToOtherSize</item>
</requires>
<requires>
<item>physical/ManualDuplex == Enabled</item>
</requires>
<requires>
<item>physical/DuplexUnit == Installed</item>
<item>printing/PaperSize != DBL_JAPANESE_POSTCARD</item>
</requires>
</constraint>
<constraint>
Check_DBL_POSTCARD_JIS_To_Enable_PrintOnBothSides_ABS
<requires>
<item>physical/ManualDuplex == Enabled</item>
</requires>
<requires>
<item>physical/DuplexUnit == Installed</item>
<item>printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice != DBL_JAPANESE_POSTCARD</item>
</requires>
</constraint>
<!-- -->
<constraint>
ManualDuplex_Is_OK_BUT_AutoDuplex_Is_Not
<forbids>
<item>printing/FitToOtherSizeChoice == PrintActualSize</item>
</forbids>
<forbids>
<item>physical/BothDuplexersOn == FALSE</item>
</forbids>
<forbids>
<item>physical/DuplexUnit == Installed</item>
</forbids>
<forbids>
<item>printing/Duplex == TRUE</item>
</forbids>
</constraint>
<constraint>
ManualDuplex_Is_OK_BUT_AutoDuplex_Is_Not_ABS
<forbids>
<item>physical/BothDuplexersOn == FALSE</item>
</forbids>
<forbids>
<item>physical/DuplexUnit == Installed</item>
</forbids>
<forbids>
<item>printing/Duplex == TRUE</item>
</forbids>
</constraint>
<!-- Warn to Turn BookletPrinting OFF -->
<constraint>
Check_Booklet_To_Disable_PrintOnBothSides
<requires>
<item>printing/BookletPrintingChoice == OFF</item>
</requires>
</constraint>
<!-- Booklet Printing -->
<constraint>
Check_Duplex_To_Allow_Booklet
<requires>
<item>printing/Duplex == TRUE</item>
</requires>
</constraint>
<constraint>
Check_Scaling_To_Allow_Booklet
<requires>
<item>printing/FitToOtherSizeChoice == PrintActualSize</item>
</requires>
</constraint>
<constraint>
Check_Scale_Equal_100_To_Allow_Booklet
<requires>
<item>printing/ScaleChoice == 100</item>
</requires>
</constraint>
<!-- Force BookletTargetSize to Size is value -->
<constraint>
Force_BookletTargetSize_To_None
<requires>
<item force="TRUE">
printing/BookletTargetSize == None
<option_attrib editable="TRUE"/>
</item>
<item force="TRUE">
printing/BookletTargetSize[LETTER] ~~ LETTER
<option_attrib editable="FALSE"/>
</item>
<item force="TRUE">
printing/BookletTargetSize[LEGAL] ~~ LEGAL
<option_attrib editable="FALSE"/>
</item>
<item force="TRUE">
printing/BookletTargetSize[A4] ~~ A4
<option_attrib editable="FALSE"/>
</item>
</requires>
</constraint>
<!-- Paper size is LETTER -->
<constraint>
Force_BookletTargetSize_To_Sizeis_Value1
<requires>
<item>printing/PaperSize == A4</item>
</requires>
<requires>
<item>printing/PaperSize == LEGAL</item>
</requires>
<requires>
<item force="TRUE">
printing/BookletTargetSize == LETTER
<option_attrib editable="TRUE"/>
</item>
<item force="TRUE">
printing/BookletTargetSize[LEGAL] ~~ LEGAL
<option_attrib editable="TRUE"/>
</item>
<item force="TRUE">
printing/BookletTargetSize[A4] ~~ A4
<option_attrib editable="FALSE"/>
</item>
<item force="TRUE">
printing/BookletTargetSize[None] ~~ None
<option_attrib editable="FALSE"/>
</item>
</requires>
</constraint>
<!-- Paper size is LEGAL -->
<constraint>
Force_BookletTargetSize_To_Sizeis_Value2
<requires>
<item>printing/PaperSize == A4</item>
</requires>
<requires>
<item>printing/PaperSize == LETTER</item>
</requires>
<requires>
<item force="TRUE">
printing/BookletTargetSize == LEGAL
<option_attrib editable="TRUE"/>
</item>
<item force="TRUE">
printing/BookletTargetSize[LETTER] ~~ LETTER
<option_attrib editable="FALSE"/>
</item>
<item force="TRUE">
printing/BookletTargetSize[A4] ~~ A4
<option_attrib editable="FALSE"/>
</item>
<item force="TRUE">
printing/BookletTargetSize[None] ~~ None
<option_attrib editable="FALSE"/>
</item>
</requires>
</constraint>
<!-- Paper size is A4 -->
<constraint>
Force_BookletTargetSize_To_Sizeis_Value3
<requires>
<item>printing/PaperSize == LETTER</item>
</requires>
<requires>
<item>printing/PaperSize == LEGAL</item>
</requires>
<requires>
<item force="TRUE">
printing/BookletTargetSize == A4
<option_attrib editable="TRUE"/>
</item>
<item force="TRUE">
printing/BookletTargetSize[LEGAL] ~~ LEGAL
<option_attrib editable="FALSE"/>
</item>
<item force="TRUE">
printing/BookletTargetSize[LETTER] ~~ LETTER
<option_attrib editable="FALSE"/>
</item>
<item force="TRUE">
printing/BookletTargetSize[None] ~~ None
<option_attrib editable="FALSE"/>
</item>
</requires>
</constraint>
<!-- Called from two places: For setting Target PaperSize and Booklet Enable -->
<constraint>
Check_PaperSizes_To_Allow_Booklet
<forbids>
<item>printing/PaperSize == EXECUTIVE</item>
<item>printing/PaperSize == A3</item>
<item>printing/PaperSize == A5</item>
<item>printing/PaperSize == 16K</item>
<item>printing/PaperSize == B5_JIS</item>
<item>printing/PaperSize == B5</item>
<item>printing/PaperSize == ENV_10</item>
<item>printing/PaperSize == ENV_MONARCH</item>
<item>printing/PaperSize == ENV_DL</item>
<item>printing/PaperSize == ENV_B5</item>
<item>printing/PaperSize == EXECUTIVE_JIS</item>
<item>printing/PaperSize == DBL_JAPANESE_POSTCARD</item>
<!-- <item>printing/PaperSize == 8_5X13</item> -->
</forbids>
</constraint>
<!-- BookletTargetSize option -->
<constraint>
Check_BookletPrinting
<requires>
<item>printing/BookletPrintingChoice == Off </item>
</requires>
</constraint>
<constraint>
BookletTargetPaperSize_Cannot_Be_A4
<forbids>
<item>printing/BookletTargetSize == A4</item>
</forbids>
</constraint>
<constraint>
BookletTargetPaperSize_Cannot_Be_LETTER
<forbids>
<item>printing/BookletTargetSize == LETTER</item>
</forbids>
</constraint>
<constraint>
BookletTargetPaperSize_Cannot_Be_LEGAL
<forbids>
<item>printing/BookletTargetSize == LEGAL</item>
</forbids>
</constraint>
<!-- PaperSizes Required Per Booklet Target Size -->
<constraint>
When_BookletTargetSize_Is_Letter_PaperSize_Cannot_Be
<forbids>
<item>printing/PaperSize == A4</item>
<item>printing/PaperSize == LEGAL</item>
</forbids>
</constraint>
<constraint>
When_BookletTargetSize_Is_A4_PaperSize_Cannot_Be
<forbids>
<item>printing/PaperSize == LETTER</item>
<item>printing/PaperSize == LEGAL</item>
</forbids>
</constraint>
<constraint>
When_BookletTargetSize_Is_Legal_PaperSize_Cannot_Be
<forbids>
<item>printing/PaperSize == A4</item>
</forbids>
</constraint>
<!-- Booklet and NUP are Incompatible -->
<!-- Booklet and Percent_Not_100 are Incompatible -->
<constraint>
Is_Booklet_On
<forbids>
<item>printing/BookletPrintingChoice == LeftEdge</item>
<item>printing/BookletPrintingChoice == RightEdge</item>
</forbids>
</constraint>
<constraint>
Check_NUP
<forbids>
<item>printing/NUpChoice != OneUp</item>
</forbids>
</constraint>
<!-- ScaleToFit Must be Set to Paper's Actual Size -->
<constraint>
ScaleToFit_Must_Be_Actual_Size
<forbids>
<item>printing/FitToOtherSizeChoice == PrintActualSize</item>
</forbids>
</constraint>
<!-- PrintDocumentOn checked to Off -->
<constraint>
ForceScaleToFit_Off
<requires>
<item force="TRUE">printing/ScalePageChoice == FitWithoutScaling</item>
</requires>
</constraint>
<!-- PrintDocumentOn checked to ON -->
<constraint>
PrintDocumentOn_Cannot_Be_On
<forbids>
<item>printing/FitToOtherSizeChoice == FitToOtherSize</item>
</forbids>
</constraint>
<constraint>
Check_Scale_Equal_100
<requires>
<item>printing/ScaleChoice == 100</item>
</requires>
</constraint>
<!-- PrintDocumentOn checked to Off -->
<constraint>
Force_TargetPaperSize_To_Letter
<requires>
<item force="TRUE">printing/FitToOtherSizeChoice[FitToOtherSize]/TargetSizeChoice == LETTER</item>
</requires>
</constraint>
<constraint>
Force_PaperSize_To_Letter
<requires>
<item force="TRUE">printing/PaperSize == LETTER</item>
</requires>
</constraint>
</constraints>
</factory>
</component>
</software>
</device>
|
:: Command execute :: | |
--[ c99shell v. 1.0 pre-release build #13 powered by Captain Crunch Security Team | http://ccteam.ru | Generation time: 0.0936 ]-- |