Software: Apache. PHP/5.5.15 uname -a: Windows NT SVR-DMZ 6.1 build 7600 (Windows Server 2008 R2 Enterprise Edition) i586 SYSTEM Safe-mode: OFF (not secure) C:\dmz\php\extras\mibs\ drwxrwxrwx |
Viewing file: UCD-SNMP-MIB-OLD.txt (17.85 KB) -rw-rw-rw- Select action/file-type: (+) | (+) | (+) | Code (+) | Session (+) | (+) | SDB (+) | (+) | (+) | (+) | (+) | (+) | UCD-SNMP-MIB-OLD DEFINITIONS ::= BEGIN -- -- This mib is a badly created mib which has been replaced by a more -- properly created UCD-SNMP-MIB. Use that mib instead. This file -- exists for historical purposes only and for use by people that -- need to support both agent versions. -- IMPORTS ucdavis FROM UCD-SNMP-MIB OBJECT-TYPE FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC Integer32 FROM SNMPv2-SMI; -- private OBJECT IDENTIFIER ::= { internet 4 } -- enterprises OBJECT IDENTIFIER ::= { private 1 } -- ucdavis OBJECT IDENTIFIER ::= { enterprises 2021 } -- processes OBJECT IDENTIFIER ::= { ucdavis 1 } -- exec OBJECT IDENTIFIER ::= { ucdavis 3 } -- memory OBJECT IDENTIFIER ::= { ucdavis 4 } -- lockd OBJECT IDENTIFIER ::= { ucdavis 5 } -- disk OBJECT IDENTIFIER ::= { ucdavis 6 } -- load OBJECT IDENTIFIER ::= { ucdavis 7 } -- version OBJECT IDENTIFIER ::= { ucdavis 100 } -- snmperrs OBJECT IDENTIFIER ::= { ucdavis 101 } -- mibRegistryTable OBJECT IDENTIFIER ::= { ucdavis 102 } -- These are the returned values of the agent type. -- returned to: .iso.org.dod.internet.mgmt.mib-2.system.sysObjectID.0 -- The following section is commented out since it is defined in the -- current UCD-SNMP-MIB -- ucdSnmpAgent OBJECT IDENTIFIER ::= { ucdavis 250 } -- hpux9 OBJECT IDENTIFIER ::= { ucdSnmpAgent 1 } -- hpux10 OBJECT IDENTIFIER ::= { ucdSnmpAgent 6 } -- sunos4 OBJECT IDENTIFIER ::= { ucdSnmpAgent 2 } -- solaris OBJECT IDENTIFIER ::= { ucdSnmpAgent 3 } -- osf OBJECT IDENTIFIER ::= { ucdSnmpAgent 4 } -- ultrix OBJECT IDENTIFIER ::= { ucdSnmpAgent 5 } -- netbsd1 OBJECT IDENTIFIER ::= { ucdSnmpAgent 7 } -- freebsd OBJECT IDENTIFIER ::= { ucdSnmpAgent 8 } -- irix OBJECT IDENTIFIER ::= { ucdSnmpAgent 9 } -- linux OBJECT IDENTIFIER ::= { ucdSnmpAgent 10 } -- bsdi OBJECT IDENTIFIER ::= { ucdSnmpAgent 11 } -- unknown OBJECT IDENTIFIER ::= { ucdSnmpAgent 255 } Processes ::= SEQUENCE { processIndex INTEGER, processNames DisplayString, processMin INTEGER, processMax INTEGER, processCount INTEGER, processErrorFlag INTEGER, processErrMessage DisplayString, processErrFix INTEGER } processes OBJECT-TYPE SYNTAX SEQUENCE OF Processes ACCESS not-accessible STATUS mandatory DESCRIPTION "A set of information on running programs/daemons." INDEX { processIndex } ::= { ucdavis 1 } processIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Reference Index for each observed process." ::= { processes 1 } processNames OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The table of process names we're Counting." ::= { processes 2 } processMin OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The minimum number of processes that should be running. An error flag is generated if the number of running processes is < the minimum." ::= { processes 3 } processMax OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The maximum number of processes that should be running. An error flag is generated if the number of running processes is > the maximum." ::= { processes 4 } processCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of current processes running with the name in question." ::= { processes 5 } processErrorFlag OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A Error flag to indicate trouble with a process. It goes to 1 if there is an error, 0 if no error." ::= { processes 100 } processErrMessage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "An error message describing the problem (if one exists)." ::= { processes 101 } processErrFix OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Setting this to one will try to fix the problem if possible." ::= { processes 102 } extensible OBJECT-TYPE SYNTAX SEQUENCE OF Extensible ACCESS not-accessible STATUS mandatory DESCRIPTION "Extensible commands returning output and result codes." INDEX { extensibleIndex } ::= { ucdavis 3 } Extensible ::= SEQUENCE { extensibleIndex INTEGER, extensibleNames DisplayString, extensibleCommand DisplayString, extensibleResult INTEGER, extensibleOutput DisplayString, extensibleErrFix INTEGER } extensibleIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Reference Index for extensible calls." ::= { extensible 1 } extensibleNames OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "Short, one name descriptions of the extensible commands." ::= { extensible 2 } extensibleCommand OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The command line to be executed." ::= { extensible 3 } extensibleResult OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The result code from the executed command." ::= { extensible 100 } extensibleOutput OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The output of the extensible command (top line only)." ::= { extensible 101 } extensibleErrFix OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Set to 1 to fix the problem, if possible." ::= { extensible 102 } -- the following section is commented out because it is already -- defined in the current UCD-SNMP-MIB -- memory OBJECT-TYPE -- SYNTAX Memory -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- "Miscellanous stuff - memory related." -- ::= { ucdavis 4 } -- -- Memory ::= SEQUENCE { -- memIndex INTEGER, -- memErrorName DisplayString, -- memTotalSwap INTEGER, -- memAvailSwap INTEGER, -- memTotalReal INTEGER, -- memAvailReal INTEGER, -- memTotalSwapTXT INTEGER, -- memAvailSwapTXT INTEGER, -- memTotalRealTXT INTEGER, -- memAvailRealTXT INTEGER, -- memTotalFree INTEGER, -- memMinimumSwap INTEGER, -- memSwapError DisplayString, -- memShared INTEGER, -- memBuffer INTEGER, -- memCached INTEGER -- } -- memIndex OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Generic Index." -- ::= { memory 1 } -- -- memErrorName OBJECT-TYPE -- SYNTAX DisplayString -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Bogus Name (swap) for consistancy with the rest of the mibs." -- ::= { memory 2 } -- -- memTotalSwap OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Total Swap Size." -- ::= { memory 3 } -- -- memAvailSwap OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Available Swap Space." -- ::= { memory 4 } -- -- memTotalReal OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Total Real/Physical Memory Size." -- ::= { memory 5 } -- -- memAvailReal OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Available Real/Physical Memory Space." -- ::= { memory 6 } -- -- memTotalSwapTXT OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Total VM used by text." -- ::= { memory 7 } -- -- memAvailSwapTXT OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Active VM used by text." -- ::= { memory 8 } -- -- memTotalRealTXT OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Total Real/Physical Memory Size used by txt." -- ::= { memory 9 } -- -- memAvailRealTXT OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Active Real/Physical Memory Space used by txt." -- ::= { memory 10 } -- -- memTotalFree OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Total Available Memory" -- ::= { memory 11 } -- -- memMinimumSwap OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Minimum amount of free swap. Otherwise memErrorSwap -- is set to 1 " -- ::= { memory 12 } -- -- memShared OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Total Shared Memory" -- ::= { memory 13 } -- -- memBuffer OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Total Buffered Memory" -- ::= { memory 14 } -- -- memCached OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Total Cached Memory" -- ::= { memory 15 } -- -- memSwapError OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Error flag. 1 indicates very little swap space left" -- ::= { memory 100 } -- -- memSwapErrorMsg OBJECT-TYPE -- SYNTAX DisplayString -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Error message describing the errorflag condition" -- ::= { memory 101 } -- -- lockd OBJECT-TYPE -- SYNTAX Lockd -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- "Tests the functionality of the rpc.lockd/rpc.statd pair." -- INDEX { lockdIndex } -- ::= { ucdavis 5 } -- Lockd ::= SEQUENCE { -- lockdIndex INTEGER, -- lockdError INTEGER, -- lockdErrorMsg DisplayString -- } -- -- lockdIndex OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Reference Index for lockd calls." -- ::= { lockd 1 } -- -- lockdError OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Error Flag. > 0 indicates error" -- ::= { lockd 100 } -- -- lockdErrorMsg OBJECT-TYPE -- SYNTAX DisplayString (SIZE (0..255)) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Error message if something is wrong" -- ::= { lockd 101 } disk OBJECT-TYPE SYNTAX SEQUENCE OF Disk ACCESS not-accessible STATUS mandatory DESCRIPTION "Disk watching information." INDEX { diskIndex } ::= { ucdavis 6 } Disk ::= SEQUENCE { diskIndex INTEGER, diskPath DisplayString, diskDevice DisplayString, diskMinimum INTEGER, diskMinPercent INTEGER, diskTotal INTEGER, diskAvail INTEGER, diskUsed INTEGER, diskPercent INTEGER, diskErrorFlag INTEGER, diskErrorMsg DisplayString } diskIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Reference number for the Disk Mib." ::= { disk 1 } diskPath OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Path where disk is mounted." ::= { disk 2 } diskDevice OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Device path" ::= { disk 3 } diskMinimum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Minimum space required on the disk." ::= { disk 4 } diskMinPercent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Minimum percentage of space required on the disk." ::= { disk 5 } diskTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total Disk Size (kbytes)" ::= { disk 6 } diskAvail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Available disk Space" ::= { disk 7 } diskUsed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used Space on Disk" ::= { disk 8 } diskPercent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Percentage of space used on disk" ::= { disk 9 } diskErrorFlag OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Error flag signaling disk is over minimum required space" ::= { disk 100 } diskErrorMsg OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "A text description of what caused the error flag to be set." ::= { disk 101 } loadaves OBJECT-TYPE SYNTAX SEQUENCE OF Loadaves ACCESS not-accessible STATUS mandatory DESCRIPTION "Load average information." INDEX { loadaveIndex } ::= { ucdavis 7 } Loadaves ::= SEQUENCE { loadaveIndex INTEGER, loadaveNames DisplayString, loadaveLoad DisplayString, loadaveConfig DisplayString, loadaveErrorFlag INTEGER, loadaveErrMessage DisplayString } loadaveIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Reference Index for each observed loadave." ::= { loadaves 1 } loadaveNames OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The list of loadave names we're Counting." ::= { loadaves 2 } loadaveLoad OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The 1,5 and 10 minute load averages." ::= { loadaves 3 } loadaveConfig OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The watch point for loadaverages to signal an error." ::= { loadaves 4 } loadaveErrorFlag OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A Error flag to indicate trouble with a loadave. It goes to 1 if there is an error, 0 if no error." ::= { loadaves 100 } loadaveErrMessage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "An error message describing the problem (if one exists)." ::= { loadaves 101 } -- the following section is commented out because it is already -- defined in the current UCD-SNMP-MIB -- version OBJECT-TYPE -- SYNTAX Version -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- "ece-snmpd version info." -- INDEX { versionIndex } -- ::= { ucdavis 100 } -- -- Version ::= SEQUENCE { -- versionIndex INTEGER, -- versionTag DisplayString, -- versionDate DisplayString, -- versionCDate DisplayString, -- versionIdent DisplayString, -- versionClearCache INTEGER, -- versionUpdateConfig INTEGER, -- versionDoDebugging INTEGER -- } -- -- versionIndex OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Index to mib (always 1)" -- ::= { version 1 } -- -- versionTag OBJECT-TYPE -- SYNTAX DisplayString -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "CVS tag keyword" -- ::= { version 2 } -- -- versionDate OBJECT-TYPE -- SYNTAX DisplayString -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Date string from RCS keyword" -- ::= { version 3 } -- -- versionCDate OBJECT-TYPE -- SYNTAX DisplayString -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Date string from ctime() " -- ::= { version 4 } -- -- versionIdent OBJECT-TYPE -- SYNTAX DisplayString -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Id string from RCS keyword" -- ::= { version 5 } -- -- versionClearCache OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Set to 1 to clear the exec cache, if enabled" -- ::= { version 10 } -- -- versionUpdateConfig OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Set to 1 to read-read the config file(s)." -- ::= { version 11 } -- -- versionRestartAgent OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Set to 1 to restart the agent." -- ::= { version 12 } -- -- versionDoDebugging OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Set to 1 to turn debugging statements on in the agent." -- ::= { version 20 } -- -- the following section is commented out because it is already -- defined in the current UCD-SNMP-MIB -- snmperrs OBJECT-TYPE -- SYNTAX Snmperrs -- ACCESS not-accessible -- STATUS mandatory -- DESCRIPTION -- "A place for the agent to report problems." -- INDEX { snmperrIndex } -- ::= { ucdavis 101 } -- -- -- Snmperrs ::= SEQUENCE { -- snmperrIndex INTEGER, -- snmperrNames DisplayString, -- snmperrErrorFlag INTEGER, -- snmperrErrMessage DisplayString -- } -- -- snmperrIndex OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "Reference Index for each observed snmperr." -- ::= { snmperrs 1 } -- -- snmperrNames OBJECT-TYPE -- SYNTAX DisplayString (SIZE (0..255)) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "snmp" -- ::= { snmperrs 2 } -- -- snmperrErrorFlag OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "A Error flag to indicate trouble with the agent. It -- goes to 1 if there is an error, 0 if no error." -- ::= { snmperrs 100 } -- -- snmperrErrMessage OBJECT-TYPE -- SYNTAX DisplayString (SIZE (0..255)) -- ACCESS read-only -- STATUS mandatory -- DESCRIPTION -- "An error message describing the problem (if one exists)." -- ::= { snmperrs 101 } -- END |
:: Command execute :: | |
--[ c99shell v. 1.0 pre-release build #13 powered by Captain Crunch Security Team | http://ccteam.ru | Generation time: 0.0312 ]-- |