Software: Apache. PHP/5.5.15 uname -a: Windows NT SVR-DMZ 6.1 build 7600 (Windows Server 2008 R2 Enterprise Edition) i586 SYSTEM Safe-mode: OFF (not secure) E:\copia nuevo\php\extras\mibs\ drwxrwxrwx | |
| Viewing file: Select action/file-type: TRANSPORT-ADDRESS-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY, mib-2 FROM SNMPv2-SMI
TEXTUAL-CONVENTION FROM SNMPv2-TC;
transportAddressMIB MODULE-IDENTITY
LAST-UPDATED "200211010000Z"
ORGANIZATION
"IETF Operations and Management Area"
CONTACT-INFO
"Juergen Schoenwaelder (Editor)
TU Braunschweig
Bueltenweg 74/75
38106 Braunschweig, Germany
Phone: +49 531 391-3289
EMail: schoenw@ibr.cs.tu-bs.de
Send comments to <mibs@ops.ietf.org>."
DESCRIPTION
"This MIB module provides commonly used transport
address definitions.
Copyright (C) The Internet Society (2002). This version of
this MIB module is part of RFC 3419; see the RFC itself for
full legal notices."
-- Revision log
REVISION "200211010000Z"
DESCRIPTION
"Initial version, published as RFC 3419."
::= { mib-2 100 }
transportDomains OBJECT IDENTIFIER ::= { transportAddressMIB 1 }
transportDomainUdpIpv4 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The UDP over IPv4 transport domain. The corresponding
transport address is of type TransportAddressIPv4 for
global IPv4 addresses."
::= { transportDomains 1 }
transportDomainUdpIpv6 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The UDP over IPv6 transport domain. The corresponding
transport address is of type TransportAddressIPv6 for
global IPv6 addresses."
::= { transportDomains 2 }
transportDomainUdpIpv4z OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The UDP over IPv4 transport domain. The corresponding
transport address is of type TransportAddressIPv4z for
scoped IPv4 addresses with a zone index."
::= { transportDomains 3 }
transportDomainUdpIpv6z OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The UDP over IPv6 transport domain. The corresponding
transport address is of type TransportAddressIPv6z for
scoped IPv6 addresses with a zone index."
::= { transportDomains 4 }
transportDomainTcpIpv4 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The TCP over IPv4 transport domain. The corresponding
transport address is of type TransportAddressIPv4 for
global IPv4 addresses."
::= { transportDomains 5 }
transportDomainTcpIpv6 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The TCP over IPv6 transport domain. The corresponding
transport address is of type TransportAddressIPv6 for
global IPv6 addresses."
::= { transportDomains 6 }
transportDomainTcpIpv4z OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The TCP over IPv4 transport domain. The corresponding
transport address is of type TransportAddressIPv4z for
scoped IPv4 addresses with a zone index."
::= { transportDomains 7 }
transportDomainTcpIpv6z OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The TCP over IPv6 transport domain. The corresponding
transport address is of type TransportAddressIPv6z for
scoped IPv6 addresses with a zone index."
::= { transportDomains 8 }
transportDomainSctpIpv4 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The SCTP over IPv4 transport domain. The corresponding
transport address is of type TransportAddressIPv4 for
global IPv4 addresses. This transport domain usually
represents the primary address on multihomed SCTP
endpoints."
::= { transportDomains 9 }
transportDomainSctpIpv6 OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The SCTP over IPv6 transport domain. The corresponding
transport address is of type TransportAddressIPv6 for
global IPv6 addresses. This transport domain usually
represents the primary address on multihomed SCTP
endpoints."
::= { transportDomains 10 }
transportDomainSctpIpv4z OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The SCTP over IPv4 transport domain. The corresponding
transport address is of type TransportAddressIPv4z for
scoped IPv4 addresses with a zone index. This transport
domain usually represents the primary address on
multihomed SCTP endpoints."
::= { transportDomains 11 }
transportDomainSctpIpv6z OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The SCTP over IPv6 transport domain. The corresponding
transport address is of type TransportAddressIPv6z for
scoped IPv6 addresses with a zone index. This transport
domain usually represents the primary address on
multihomed SCTP endpoints."
::= { transportDomains 12 }
transportDomainLocal OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The Posix Local IPC transport domain. The corresponding
transport address is of type TransportAddressLocal.
The Posix Local IPC transport domain incorporates the
well-known UNIX domain sockets."
::= { transportDomains 13 }
transportDomainUdpDns OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The UDP transport domain using fully qualified domain
names. The corresponding transport address is of type
TransportAddressDns."
::= { transportDomains 14 }
transportDomainTcpDns OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The TCP transport domain using fully qualified domain
names. The corresponding transport address is of type
TransportAddressDns."
::= { transportDomains 15 }
transportDomainSctpDns OBJECT-IDENTITY
STATUS current
DESCRIPTION
"The SCTP transport domain using fully qualified domain
names. The corresponding transport address is of type
TransportAddressDns."
::= { transportDomains 16 }
TransportDomain ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents a transport domain.
Some possible values, such as transportDomainUdpIpv4, are
defined in this module. Other possible values can be
defined in other MIB modules."
SYNTAX OBJECT IDENTIFIER
--
-- The enumerated values of the textual convention below should
-- be identical to the last sub-identifier of the OID registered
-- for the same domain.
--
TransportAddressType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"A value that represents a transport domain. This is the
enumerated version of the transport domain registrations
in this MIB module. The enumerated values have the
following meaning:
unknown(0) unknown transport address type
udpIpv4(1) transportDomainUdpIpv4
udpIpv6(2) transportDomainUdpIpv6
udpIpv4z(3) transportDomainUdpIpv4z
udpIpv6z(4) transportDomainUdpIpv6z
tcpIpv4(5) transportDomainTcpIpv4
tcpIpv6(6) transportDomainTcpIpv6
tcpIpv4z(7) transportDomainTcpIpv4z
tcpIpv6z(8) transportDomainTcpIpv6z
sctpIpv4(9) transportDomainSctpIpv4
sctpIpv6(10) transportDomainSctpIpv6
sctpIpv4z(11) transportDomainSctpIpv4z
sctpIpv6z(12) transportDomainSctpIpv6z
local(13) transportDomainLocal
udpDns(14) transportDomainUdpDns
tcpDns(15) transportDomainTcpDns
sctpDns(16) transportDomainSctpDns
This textual convention can be used to represent transport
domains in situations where a syntax of TransportDomain is
unwieldy (for example, when used as an index).
The usage of this textual convention implies that additional
transport domains can only be supported by updating this MIB
module. This extensibility restriction does not apply for the
TransportDomain textual convention which allows MIB authors
to define additional transport domains independently in
other MIB modules."
SYNTAX INTEGER {
unknown(0),
udpIpv4(1),
udpIpv6(2),
udpIpv4z(3),
udpIpv6z(4),
tcpIpv4(5),
tcpIpv6(6),
tcpIpv4z(7),
tcpIpv6z(8),
sctpIpv4(9),
sctpIpv6(10),
sctpIpv4z(11),
sctpIpv6z(12),
local(13),
udpDns(14),
tcpDns(15),
sctpDns(16)
}
TransportAddress ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Denotes a generic transport address.
A TransportAddress value is always interpreted within the
context of a TransportAddressType or TransportDomain value.
Every usage of the TransportAddress textual convention MUST
specify the TransportAddressType or TransportDomain object
which provides the context. Furthermore, MIB authors SHOULD
define a separate TransportAddressType or TransportDomain
object for each TransportAddress object. It is suggested that
the TransportAddressType or TransportDomain is logically
registered before the object(s) which use the
TransportAddress textual convention if they appear in the
same logical row.
The value of a TransportAddress object must always be
consistent with the value of the associated
TransportAddressType or TransportDomain object. Attempts
to set a TransportAddress object to a value which is
inconsistent with the associated TransportAddressType or
TransportDomain must fail with an inconsistentValue error.
When this textual convention is used as a syntax of an
index object, there may be issues with the limit of 128
sub-identifiers specified in SMIv2, STD 58. In this case,
the OBJECT-TYPE declaration MUST include a 'SIZE' clause
to limit the number of potential instance sub-identifiers."
SYNTAX OCTET STRING (SIZE (0..255))
TransportAddressIPv4 ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1d.1d.1d.1d:2d"
STATUS current
DESCRIPTION
"Represents a transport address consisting of an IPv4
address and a port number (as used for example by UDP,
TCP and SCTP):
octets contents encoding
1-4 IPv4 address network-byte order
5-6 port number network-byte order
This textual convention SHOULD NOT be used directly in object
definitions since it restricts addresses to a specific format.
However, if it is used, it MAY be used either on its own or
in conjunction with TransportAddressType or TransportDomain
as a pair."
SYNTAX OCTET STRING (SIZE (6))
TransportAddressIPv6 ::= TEXTUAL-CONVENTION
DISPLAY-HINT "0a[2x:2x:2x:2x:2x:2x:2x:2x]0a:2d"
STATUS current
DESCRIPTION
"Represents a transport address consisting of an IPv6
address and a port number (as used for example by UDP,
TCP and SCTP):
octets contents encoding
1-16 IPv6 address network-byte order
17-18 port number network-byte order
This textual convention SHOULD NOT be used directly in object
definitions since it restricts addresses to a specific format.
However, if it is used, it MAY be used either on its own or
in conjunction with TransportAddressType or TransportDomain
as a pair."
SYNTAX OCTET STRING (SIZE (18))
TransportAddressIPv4z ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1d.1d.1d.1d%4d:2d"
STATUS current
DESCRIPTION
"Represents a transport address consisting of an IPv4
address, a zone index and a port number (as used for
example by UDP, TCP and SCTP):
octets contents encoding
1-4 IPv4 address network-byte order
5-8 zone index network-byte order
9-10 port number network-byte order
This textual convention SHOULD NOT be used directly in object
definitions since it restricts addresses to a specific format.
However, if it is used, it MAY be used either on its own or
in conjunction with TransportAddressType or TransportDomain
as a pair."
SYNTAX OCTET STRING (SIZE (10))
TransportAddressIPv6z ::= TEXTUAL-CONVENTION
DISPLAY-HINT "0a[2x:2x:2x:2x:2x:2x:2x:2x%4d]0a:2d"
STATUS current
DESCRIPTION
"Represents a transport address consisting of an IPv6
address, a zone index and a port number (as used for
example by UDP, TCP and SCTP):
octets contents encoding
1-16 IPv6 address network-byte order
17-20 zone index network-byte order
21-22 port number network-byte order
This textual convention SHOULD NOT be used directly in object
definitions since it restricts addresses to a specific format.
However, if it is used, it MAY be used either on its own or
in conjunction with TransportAddressType or TransportDomain
as a pair."
SYNTAX OCTET STRING (SIZE (22))
TransportAddressLocal ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1a"
STATUS current
DESCRIPTION
"Represents a POSIX Local IPC transport address:
octets contents encoding
all POSIX Local IPC address string
The Posix Local IPC transport domain subsumes UNIX domain
sockets.
This textual convention SHOULD NOT be used directly in object
definitions since it restricts addresses to a specific format.
However, if it is used, it MAY be used either on its own or
in conjunction with TransportAddressType or TransportDomain
as a pair.
When this textual convention is used as a syntax of an
index object, there may be issues with the limit of 128
sub-identifiers specified in SMIv2, STD 58. In this case,
the OBJECT-TYPE declaration MUST include a 'SIZE' clause
to limit the number of potential instance sub-identifiers."
REFERENCE
"Protocol Independent Interfaces (IEEE POSIX 1003.1g)"
SYNTAX OCTET STRING (SIZE (1..255))
TransportAddressDns ::= TEXTUAL-CONVENTION
DISPLAY-HINT "1a"
STATUS current
DESCRIPTION
"Represents a DNS domain name followed by a colon ':'
(ASCII character 0x3A) and a port number in ASCII.
The name SHOULD be fully qualified whenever possible.
Values of this textual convention are not directly useable as
transport-layer addressing information, and require runtime
resolution. As such, applications that write them must be
prepared for handling errors if such values are not
supported, or cannot be resolved (if resolution occurs at the
time of the management operation).
The DESCRIPTION clause of TransportAddress objects that may
have TransportAddressDns values must fully describe how (and
when) such names are to be resolved to IP addresses and vice
versa.
This textual convention SHOULD NOT be used directly in object
definitions since it restricts addresses to a specific format.
However, if it is used, it MAY be used either on its own or
in conjunction with TransportAddressType or TransportDomain
as a pair.
When this textual convention is used as a syntax of an
index object, there may be issues with the limit of 128
sub-identifiers specified in SMIv2, STD 58. In this case,
the OBJECT-TYPE declaration MUST include a 'SIZE' clause
to limit the number of potential instance sub-identifiers."
SYNTAX OCTET STRING (SIZE (1..255))
END
|
:: Command execute :: | |
--[ c99shell v. 1.0 pre-release build #13 powered by Captain Crunch Security Team | http://ccteam.ru | Generation time: 0.0312 ]-- |